i.MX Processors中的主题 MIMX8UX5CVLFZAC

MIMX8UX5CVLFZAC

Mohan1 — Wed, 17 Mar 2021 13:44:12 GMT

Dear Team,

I am Planning to use this part one of my application based cost cost perspective, so I have following query related to this part -MIMX8UX5CVLFZAC

1-This MIMX8UX5CVLFZAC part will support 32bit DDR3 ?

2-Is there any option to connect the parallel MRAM(16bit) with external memory interface ?

Regards,

Mohan M

Re: MIMX8UX5CVLFZAC

Bio_TICFSL — Thu, 18 Mar 2021 13:55:25 GMT

Hello Mohan1,

1. Its support to connect DDR3L could be 32 or 64 bit.

2. No there is no option to connect MRAM

Regards

Re: MIMX8UX5CVLFZAC

Mohan1 — Thu, 18 Mar 2021 14:17:31 GMT

Dear Team,

Thanks for the reply

In page no#5,8 &,49 mentioned liks this, The SDRAM controller will support only 16bit DDR3L & LPDDR4.Also there is no dedicated pin availabe in pin configuration table -Page#124.

"• Memory types: LPDDR4and DDR3L
• One channel of 16-bit memory:
• LPDDR4 up to 1.2 GHz
• DDR3L up to 933MHz "

I am referring the datasheet " Document Number: IMX8DXIEC
Rev. 0, 05/2020" Please confirm the same.

Regards,

Mohan M

Re: MIMX8UX5CVLFZAC

Bio_TICFSL — Thu, 18 Mar 2021 14:33:14 GMT

Yes, sorry is only one channel for 16bit.

Regards

Re: MIMX8UX5CVLFZAC

Mohan1 — Thu, 18 Mar 2021 14:47:10 GMT

Dear Team,

Thank for the reply,

can you please let me know, Is there any alternate part with this specification& same cost.

Regards,

Mohan M

Re: MIMX8UX5CVLFZAC

Mohan1 — Thu, 25 Mar 2021 16:09:16 GMT

Dear team,

Thanks for your reply,

I have some additional query in below, can you please support.

1- Maximum memory supported by SDRAM controller (MIMX8UX5CVLFZAC) - DDR3L & DDR4

Regards,

Mohan M

Re: MIMX8UX5CVLFZAC

Mohan1 — Wed, 31 Mar 2021 08:57:13 GMT

Hi,

Do you have evaluation board with MIMX8UX5CVLFZAC-part?

Regards,

Mohan M

Re: MIMX8UX5CVLFZAC

Bio_TICFSL — Mon, 05 Apr 2021 13:20:43 GMT

Hello,

We have the EVB for the Quad version https://www.nxp.com/design/development-boards/i-mx-evaluation-and-development-boards/i-mx-8quadxplus-multisensory-enablement-kit-mek:MCIMX8QXP-CPU

but is works for Dual as well.

regards

Re: MIMX8UX5CVLFZAC

Mohan1 — Mon, 05 Apr 2021 15:03:19 GMT

Hello Team,

Thanks for the reply,

The Quad version board have any chip socket to replace the dualx Chip?

I have found the Dualx board part number : MCIMX8DX-CPU but there is no stock in NXP and distributors. MCIMX8DX-CPU Product Information|NXP

Maximum memory supported by SDRAM controller (MIMX8UX5CVLFZAC) - DDR3L & DDR4 ?

Regards,

Mohan M