https://community.nxp.com/t5/i-MX-Processors/i-MX8-Cortex-M7-SPI-support/m-p/1233969#M169779 <P>Hi Krzysztof</P> <P>&nbsp;</P> <P>one can look at ecspi examples in MCUXpresso SDK_EVK-MIMX8MN</P> <P>(folder ../driver_examples/ecspi/) available on</P> <P><A href="https://mcuxpresso.nxp.com/en/welcome" target="_blank">https://mcuxpresso.nxp.com/en/welcome</A></P> <P>&nbsp;</P> <P>Best regards<BR />igor</P> Sun, 21 Feb 2021 11:23:06 GMT igorpadykov 2021-02-21T11:23:06Z https://community.nxp.com/t5/i-MX-Processors/i-MX8-Cortex-M7-SPI-support/m-p/1233964#M169777 <P>Hi,</P><P>we are using a board equipped with i.MX8 nano processor. The IC contains also Cortex M7 processor and we want to apply it to do some background SPI transfer (the timings are critical for us so we are not going to use Linux). Is available any software which supports the development of SPI data transfer procedures? Maybe a C-code dedicated for FreeRTOS?</P><P>Regards</P><P>Krzysztof</P> Sun, 21 Feb 2021 08:54:45 GMT https://community.nxp.com/t5/i-MX-Processors/i-MX8-Cortex-M7-SPI-support/m-p/1233964#M169777 kko 2021-02-21T08:54:45Z https://community.nxp.com/t5/i-MX-Processors/i-MX8-Cortex-M7-SPI-support/m-p/1233969#M169779 <P>Hi Krzysztof</P> <P>&nbsp;</P> <P>one can look at ecspi examples in MCUXpresso SDK_EVK-MIMX8MN</P> <P>(folder ../driver_examples/ecspi/) available on</P> <P><A href="https://mcuxpresso.nxp.com/en/welcome" target="_blank">https://mcuxpresso.nxp.com/en/welcome</A></P> <P>&nbsp;</P> <P>Best regards<BR />igor</P> Sun, 21 Feb 2021 11:23:06 GMT https://community.nxp.com/t5/i-MX-Processors/i-MX8-Cortex-M7-SPI-support/m-p/1233969#M169779 igorpadykov 2021-02-21T11:23:06Z