topic Re: EInk waveform conversion and REGAL support in i.MX Processors

EInk waveform conversion and REGAL support

robertopozzi — Fri, 19 Feb 2021 03:45:45 GMT

I have received the attached waveform file from EInk and need to convert it for the firmware. Can you convert it and return, or direct us to a tool that will let us to the conversion?

I would like to use it with my IMX6SLL board enabling REGAL support

Our WBF file is covered by EInk NDA so I can't attach here but I can email it to you. What address should I use?

Re: EInk waveform conversion and REGAL support

jimmychan — Fri, 19 Feb 2021 08:38:16 GMT

For confidential assistance, you can submit a ticket from the link below.

https://www.nxp.com/support/support:SUPPORTHOME

Re: EInk waveform conversion and REGAL support

robertopozzi — Mon, 22 Feb 2021 08:44:41 GMT

Sorry if I insist, but I urgently need the conversion of the attached EINK WBF file.
I need REGAL and REGALD support
Roberto

Re: EInk waveform conversion and REGAL support

jimmychan — Tue, 23 Feb 2021 00:56:07 GMT

FYI.

https://community.nxp.com/t5/Other-NXP-Products/EInk-waveform-conversion-and-REGAL-support/m-p/1134477