i.MX ProcessorsのトピックRe: bitbake -c menuconfig u-boot-imx -f failed

bitbake -c menuconfig u-boot-imx -f failed

vinothkumars — Thu, 11 Feb 2021 14:24:28 GMT

Dear NXP,

I am working uboot configuration - u-boot-imx_2020.04.bb.

I got following error while setting the configuration,

bitbake -c menuconfig u-boot-imx -f

make *** no rule to make target menuconfig'. stop

Re: bitbake -c menuconfig u-boot-imx -f failed

Bio_TICFSL — Tue, 16 Feb 2021 13:56:02 GMT

Hello,

You may try this configuration:

bitbake -c clean u-boot-imx && bitbake u-boot-imx

Regards

Re: bitbake -c menuconfig u-boot-imx -f failed

vinothkumars — Wed, 17 Feb 2021 05:23:41 GMT

Thank you Bio_TICFSL for the reply

Re: bitbake -c menuconfig u-boot-imx -f failed

arunkumar_maniv — Thu, 25 Nov 2021 14:58:53 GMT

Hello,

I have also faced same issue when tried to do menuconfig for u-boot-imx (Cmd used: bitbake -f -c menuconfig u-boot-imx) the command error appeared as no rule to make target 'menuconfig'.

Then used command as suggested in this discussion - bitbake -c clean u-boot-imx && bitbake u-boot-imx.

But that does not open the menuconfig UI. Please help.

With Regards,

Arun