Interrupt polling using External pin on imx8m Mini eval kit

hsiddiquee — Mon, 04 Jan 2021 21:53:19 GMT

Hello,

I'm trying to poll an external interrupt (event handler) through imx8mm eval kit. I tried gpiochip5 line 0 for external pin number 31. It is giving me an error. I think becuase it is not an interrupt pin. Is there any pin that can be use for this purpose without going through PCA*** IC. If not, can you guys help me how can I make my polling pin.

Thank you

Re: Interrupt polling using External pin on imx8m Mini eval kit

igorpadykov — Tue, 05 Jan 2021 00:01:43 GMT

Hi hsiddiquee

in general any gpio pin can be used for that, for example one can look at answer on

https://community.nxp.com/t5/i-MX-Processors/GPIO-interrupt-on-i-MX6/m-p/364279

Best regards
igor

topic Re: Interrupt polling using External pin on imx8m Mini eval kit in i.MX Processors

Interrupt polling using External pin on imx8m Mini eval kit

Re: Interrupt polling using External pin on imx8m Mini eval kit