topic Re: what is the best selection for microcontroller by clock frequency up to 600MHz? in i.MX Processors

what is the best selection for microcontroller by clock frequency up to 600MHz?

vahidnoori — Tue, 26 Nov 2013 13:02:38 GMT

hi ,i am seeking for microcontroler (arm) that work up to 600 MHz . can i use imx535 for microcontroler application?because i need a microcontroler that work in 600MHz? is it possible?

Re: what is the best selection for microcontroller by clock frequency up to 600MHz?

VladanJovanovic — Tue, 26 Nov 2013 13:13:09 GMT

Yes, i.MX53 can run at 600MHz, so can be used.

Re: what is the best selection for microcontroller by clock frequency up to 600MHz?

vahidnoori — Tue, 26 Nov 2013 13:34:24 GMT

yes i know it.but imx53 usually use for micro processor not micro controler .i dont decide make OS on imx53 .just use as microcontroler. there is no document for imx53 that explain it's registers,GPIO and .. like cortex m4 user guide for example .ok?

Re: what is the best selection for microcontroller by clock frequency up to 600MHz?

VladanJovanovic — Tue, 26 Nov 2013 13:45:22 GMT

i.MX53 documentation: http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=i.MX535&nodeId=018rH3ZrDR988D&fpsp=1&tab=Documentation_Tab

i.MX53 Reference Manual: http://cache.freescale.com/files/32bit/doc/ref_manual/iMX53RM.pdf

Also check IMX53_QSB_OBDS on Software and Tools page (under Lab and Test Software): http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=i.MX535&nodeId=018rH3ZrDR988D&fpsp=1&tab=Design_Tools_Tab

Re: what is the best selection for microcontroller by clock frequency up to 600MHz?

VladanJovanovic — Tue, 26 Nov 2013 13:50:25 GMT

You might check Nucleus for RTOS on i.MX53 as well:

http://www.mentor.com/embedded-software/nucleus/processor-support