i.MX ProcessorsのトピックRe: MIMXRT1020_EVK Design files .alg file

MIMXRT1020_EVK Design files .alg file

fycevher — Wed, 02 Dec 2020 11:01:18 GMT

I want to import layout of MIMXRT1020_EVK which is LAY-29857_B1.brd to Altium Designer. Since I have no Allegro license I need .alg file.

Could you please help me about it?

Regards

Re: MIMXRT1020_EVK Design files .alg file

jeremyzhou — Thu, 03 Dec 2020 00:15:57 GMT

Hi,
Thank you for your interest in NXP Semiconductor products and for the opportunity to serve you.
1) Could you please help me with it?
-- Unfortunately, we don't provide it, as I know, the Altium Designer support to import the brd file, maybe you can give it a try.
Have a great day,
TIC

-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "Mark Correct" button. Thank you!

- We are following threads for 7 weeks after the last post, later replies are ignored
Please open a new thread and refer to the closed one, if you have a related question at a later point in time.
-------------------------------------------------------------------------------

Re: MIMXRT1020_EVK Design files .alg file

fycevher — Thu, 03 Dec 2020 12:27:14 GMT

@jeremyzhou

As far as I know, Altium Designer can import .brd files in two ways; firstly, Allegro license should be available. secondly, .alg files can be used without Allegro license. I have no Allegro license. Therefore, I need ASCII (.alg) files.

In this topic, Yuri sent .alg file to solve the same problem. Please help me!

Good bye!