topic Re: Bitbake Error:opencv_4.2.0.imx.bb:do_compile) failed with exit code '1' in i.MX Processors

Bitbake Error:opencv_4.2.0.imx.bb:do_compile) failed with exit code '1'

milav_soni — Tue, 24 Nov 2020 07:50:44 GMT

Hello Guys,

I have face following error when I send bitbake command in my host PC.

Command :- $bitbake imx-image-multimedia

Error :- ERROR: Task (../Embedded_Software/Yocto/imx-yocto-bsp/sources/meta-imx/meta-bsp/recipes-support/opencv/opencv_4.2.0.imx.bb:do_compile) failed with exit code '1'

==============================================================================

Here I have describe host setup:

Processor :- Intel Core2 Duo CPU E4500@2.20Ghz x 2

OS TYpe :- 64-Bit

Disk :- 1 TB

Memory :- 3.8 GiB

OS :- Linux (Ubuntu 16.04 LTS)

And to make a image i write following command

1) install Essential Yocto Project host packages.

2) install repo using (sudo apt-get install repo)

3) download bsp

$ mkdir imx-yocto-bsp
$ cd imx-yocto-bsp
$ repo init -u https://source.codeaurora.org/external/imx/imx-manifest -b imx-linux-zeus -m imx-5.4.47-2.2.0.xml
$ repo sync

4) Build configurations

$ DISTRO=fsl-imx-wayland MACHINE=imx8mnevk source ./imx-setup-release.sh -b imx8mn_build

5) Edit local.conf file

Multilib enablement
# Define multilib target
require conf/multilib.conf
MULTILIBS = "multilib:lib32"
DEFAULTTUNE_virtclass-multilib-lib32 = "armv7athf-neon"
# Add the multilib packages to the image
IMAGE_INSTALL_append = "lib32-glibc lib32-libgcc lib32-libstdc++"

Disable the deb packaging to avoid any processing errors. Check in local.conf , and comment if there are:
#PACKAGE_CLASSES = "package_deb"
#EXTRA_IMAGE_FEATURES += "package-management"

6) $bitbake imx-image-multimedia

==============================================================================

so can you please help me to sort out this error.

Here I have attached error log file and local.conf file.

Waiting for your answer.

Thank You

Re: Bitbake Error:opencv_4.2.0.imx.bb:do_compile) failed with exit code '1'

weidong_sun — Wed, 25 Nov 2020 04:23:01 GMT

Hello milav_soni,

It seems that your memory size is too small. So when errors occured, you can try like below: compile opencv seperately

# bitbake opencv -c cleansstate

# bitbake opencv -c complie

If there is no issues, continue compiling multimedia image.

# bitbake imx-image-multimedia

Hope this information is helpful to you.

Have a nice day!

B.R,

weidong

Re: Bitbake Error:opencv_4.2.0.imx.bb:do_compile) failed with exit code '1'

milav_soni — Wed, 25 Nov 2020 05:44:18 GMT

Hello @weidong_sun

Thank you for your reply.

I have tried to build OpenCV separately as you said.

But I face same error when i send command "bitbake opencv -c complie".

Error :- Task do_complie does not exist for target opencv (../Embedded_Software/Yocto/imx-yocto-bsp/sources/meta-imx/meta-bsp/recipes-support/opencv/opencv_4.2.0.imx.bb:do_compile). close matches : do_compile.

Error :- command execution failed : 1

Is there any change occur in local.conf file related to opencv?

please help me out.

Re: Bitbake Error:opencv_4.2.0.imx.bb:do_compile) failed with exit code '1'

turker — Wed, 25 Nov 2020 06:08:31 GMT

You have a typo here "bitbake opencv -c complie". It should be "bitbake opencv -c compile".

Re: Bitbake Error:opencv_4.2.0.imx.bb:do_compile) failed with exit code '1'

weidong_sun — Wed, 25 Nov 2020 06:13:42 GMT

if you have ever close original terminal, you should run the command:

# cd ../Embedded_Software/Yocto/imx-yocto-bsp/
# source setup-environment imx8mn_build

Then run :

# bitbake opencv -c compile

[note]

opencv recipe is here:

./meta-imx/meta-bsp/recipes-support/opencv/opencv_4.2.0.imx.bb

so the command is no problem.

Try it, again.

Have a nice day!

Weidong

Re: Bitbake Error:opencv_4.2.0.imx.bb:do_compile) failed with exit code '1'

milav_soni — Wed, 25 Nov 2020 12:56:23 GMT

Hello @weidong_sun

Thank You For Your Response.

I am trying to follow your steps to build only opencv for i.mx8m nano evk.

But the process is stuck at 80%. Please see snapshot for the same.

Is there hard disk/RAM error or else pc configuration is low for the same?

please help me out.

Thank You.

Re: Bitbake Error:opencv_4.2.0.imx.bb:do_compile) failed with exit code '1'

milav_soni — Wed, 25 Nov 2020 12:57:07 GMT

Hello @turker

Thanks For your Reply.

Re: Bitbake Error:opencv_4.2.0.imx.bb:do_compile) failed with exit code '1'

weidong_sun — Wed, 25 Nov 2020 14:06:16 GMT

Hi @milav_soni ，

See below, please! Just finished.

My notebook is 32GB memory, and assign ubuntu 18.04 on vmware player 16GB memory and 4 cores.

So advise you to increase memory size of your PC or notebook.

Hope the test is helpful to you.

Have a nice day!

B.R,

Weidong

Re: Bitbake Error:opencv_4.2.0.imx.bb:do_compile) failed with exit code '1'

milav_soni — Thu, 26 Nov 2020 05:03:00 GMT

Hello @weidong_sun

May i know your pc configuration? about processor and frequency?

My PC has "Intel Core2 Duo CPU E4500@2.20Ghz x 2" Processor.

So is this okay for these? i need to cross check only.

Thank You

Re: Bitbake Error:opencv_4.2.0.imx.bb:do_compile) failed with exit code '1'

milav_soni — Thu, 03 Dec 2020 04:57:07 GMT

Hello @weidong_sun

I have tried to build opencv separately, but i face same error as i mention in first comment.

so what is the problem?

Error :- ERROR: Task (../Embedded_Software/Yocto/imx-yocto-bsp/sources/meta-imx/meta-bsp/recipes-support/opencv/opencv_4.2.0.imx.bb:do_compile) failed with exit code '1'

Here I have attached build log.

Please Help me.

Re: Bitbake Error:opencv_4.2.0.imx.bb:do_compile) failed with exit code '1'

Guillem — Tue, 12 Mar 2024 10:11:09 GMT

Hi, please edit the first message, 3rd line, 'compile' instead of 'complie'

Thanks a lot for your support