https://community.nxp.com/t5/i-MX-Processors/i-MX6-UART3/m-p/1172202#M163932 <P>hi,</P><P>&nbsp;</P><P>&nbsp;</P><P>&nbsp; i need to execute the UART3 so what we have to change in the sample code .</P><P>&nbsp;we have an default UART2 .so could you share the details.if any document available please share the link</P><P>&nbsp;</P><P>thanks</P><P>kalai</P> Fri, 23 Oct 2020 06:00:24 GMT kalai 2020-10-23T06:00:24Z https://community.nxp.com/t5/i-MX-Processors/i-MX6-UART3/m-p/1172202#M163932 <P>hi,</P><P>&nbsp;</P><P>&nbsp;</P><P>&nbsp; i need to execute the UART3 so what we have to change in the sample code .</P><P>&nbsp;we have an default UART2 .so could you share the details.if any document available please share the link</P><P>&nbsp;</P><P>thanks</P><P>kalai</P> Fri, 23 Oct 2020 06:00:24 GMT https://community.nxp.com/t5/i-MX-Processors/i-MX6-UART3/m-p/1172202#M163932 kalai 2020-10-23T06:00:24Z https://community.nxp.com/t5/i-MX-Processors/i-MX6-UART3/m-p/1184211#M164979 <P>You need to change debug UART in the DTB and kernel commandline.<BR />Here is a thread with the same question:</P> <P><A href="https://community.nxp.com/t5/i-MX-Processors/I-want-to-change-the-console-port/m-p/945689" target="_blank">https://community.nxp.com/t5/i-MX-Processors/I-want-to-change-the-console-port/m-p/945689</A></P> Tue, 17 Nov 2020 04:44:47 GMT https://community.nxp.com/t5/i-MX-Processors/i-MX6-UART3/m-p/1184211#M164979 b36401 2020-11-17T04:44:47Z