i.MX Processors中的主题 Re: Flashing error using UUU on i.mx6ull

Flashing error using UUU on i.mx6ull

tejush44 — Wed, 16 Sep 2020 08:41:59 GMT

Hi,

I am using IMX6ULL , I have generated the image in yocto using bitbake fsl-image-gui.

I have successfully flashed the image through SDcard using .sdcard image.
But if we remove the sdcard it wont boot.

So i need to flash board in emmc or Nand flash. I used UUU utility for flashing through serial getting like Bad Linux ARM zImage magic!
=>

Below i have attached the errors while using UUU.

Please try to help me in flashing the board through Emmc or NAND

Re: Flashing error using UUU on i.mx6ull

igorpadykov — Wed, 16 Sep 2020 09:44:34 GMT

Hi tejush44

reason may be wrong uuu/uboot/bsp versions, as they should be aligned as

described in Release Notes of each BSP available on

https://www.nxp.com/design/software/embedded-software/i-mx-software/embedded-linux-for-i-mx-applications-processors:IMXLINUX?tab=In-Depth_Tab

1.jpg

https://github.com/NXPmicro/mfgtools/releases

Best regards
igor

Re: Flashing error using UUU on i.mx6ull

tejush44 — Wed, 16 Sep 2020 11:55:21 GMT

Hi @igorpadykov thanks for the reply.

Actually i have downloaded UUU version 1.3.102 by using link https://github.com/NXPmicro/mfgtools/releases/tag/uuu_1.3.102

But I untar that and getting error while installing UUU.

I tried cmake .

after that make

Getting the error like below:

root@teju:/home/teju/Downloads/mfgtools-uuu_1.3.102# make
[ 3%] Generating gitversion.h
build not in appveyor
mv: cannot stat '/home/teju/Downloads/mfgtools-uuu_1.3.102/libuuu/gen/gitversion.h.tmp': No such file or directory
libuuu/CMakeFiles/uuc_s.dir/build.make:61: recipe for target 'libuuu/gitversion.h' failed
make[2]: *** [libuuu/gitversion.h] Error 1
CMakeFiles/Makefile2:85: recipe for target 'libuuu/CMakeFiles/uuc_s.dir/all' failed
make[1]: *** [libuuu/CMakeFiles/uuc_s.dir/all] Error 2
Makefile:127: recipe for target 'all' failed
make: *** [all] Error 2

Re: Flashing error using UUU on i.mx6ull

igorpadykov — Wed, 16 Sep 2020 14:35:27 GMT

Hi tejush44

are you using uboot/linux from official nxp source.codeaurora.org/external/imx/linux-imx repository
https://source.codeaurora.org/external/imx/linux-imx/tree/?h=imx_5.4.24_2.1.0

https://source.codeaurora.org/external/imx/uboot-imx/tree/?h=imx_v2020.04_5.4.24_2.1.0

Best regards
igor

Re: Flashing error using UUU on i.mx6ull

tejush44 — Thu, 17 Sep 2020 06:18:47 GMT

Hi @igorpadykov

I built images using yocto by using NXP official repo

repo init -u https://source.codeaurora.org/external/imx/fsl-arm-yocto-bsp -b imx-4.1-krogoth

using this repo i have build bitbake fsl-image-gui images.

Thanks

Teju S H

Re: Flashing error using UUU on i.mx6ull

igorpadykov — Thu, 17 Sep 2020 07:04:20 GMT

Hi Teju

for L4.1.15 nxp supported mfg tools as described in Documentation

1.jpg

suggest to use releases which support uuu tool, description can be found

in linux documentation (Release Notes) on

https://www.nxp.com/design/software/embedded-software/i-mx-software/embedded-linux-for-i-mx-applications-processors:IMXLINUX?tab=In-Depth_Tab

Best regards
igor

Re: Flashing error using UUU on i.mx6ull

tejush44 — Thu, 17 Sep 2020 10:41:20 GMT

Hi @igorpadykov

Thanks for the reply,

I have downloaded the mfgtool as per that document L4.1.15_2.0.0-ga_mfg-tools.
I have downloaded that in ubuntu, Can u please explain me how to use that i am new to this tool.

Actually i have booted board by SDcard. Please suggest me to boot image in nand or emmc flash.

Thanks

Teju S H

Re: Flashing error using UUU on i.mx6ull

igorpadykov — Thu, 17 Sep 2020 12:16:30 GMT

Hi Teju

one can look at

https://community.nxp.com/t5/FTF-2015-Training-Presentations/AMF-ACC-T1652/ta-p/1119908

Best regards
igor

Re: Flashing error using UUU on i.mx6ull

tejush44 — Fri, 18 Sep 2020 10:45:17 GMT

Hi @igorpadykov

That is MFGtools, cant we do with UUU to flash the board in linux..?

or else can i get cfg.ini for imx6ULL emmc flash.

Thanks

Teju S H

Re: Flashing error using UUU on i.mx6ull

igorpadykov — Fri, 18 Sep 2020 11:10:47 GMT

Hi Teju

yes the same things can be done with uuu, it is supported in latest linux releases

described on

https://www.nxp.com/design/software/embedded-software/i-mx-software/embedded-linux-for-i-mx-applications-processors:IMXLINUX?tab=In-Depth_Tab

Best regards
igor