topic imx6d7c通过EIM，与FPGA实现数据上的通讯（The imx6d7c chip realizes data communication with FPGA through EIM） in i.MX Processors https://community.nxp.com/t5/i-MX-Processors/imx6d7c%E9%80%9A%E8%BF%87EIM-%E4%B8%8EFPGA%E5%AE%9E%E7%8E%B0%E6%95%B0%E6%8D%AE%E4%B8%8A%E7%9A%84%E9%80%9A%E8%AE%AF-The-imx6d7c-chip-realizes-data/m-p/1149581#M161316 <P>自己画板子，打板做出来一块，以IMX6D7C和FPGA为主的电路板，现在想通过IAR&nbsp; FOR&nbsp; ARM软件，下载程序（jlink）到电路板，让imx6d7c与FPGA通过EIM，实现数据通讯。</P><P>（I draw a board by myself and create a circuit board based on IMX6D7C and FPGA. Now I want to download a program (jlink) to the circuit board through IAR FOR ARM software, so that imx6d7c and FPGA can communicate with each other through EIM.）</P> Mon, 07 Sep 2020 08:50:06 GMT 刘洋 2020-09-07T08:50:06Z imx6d7c通过EIM，与FPGA实现数据上的通讯（The imx6d7c chip realizes data communication with FPGA through EIM） https://community.nxp.com/t5/i-MX-Processors/imx6d7c%E9%80%9A%E8%BF%87EIM-%E4%B8%8EFPGA%E5%AE%9E%E7%8E%B0%E6%95%B0%E6%8D%AE%E4%B8%8A%E7%9A%84%E9%80%9A%E8%AE%AF-The-imx6d7c-chip-realizes-data/m-p/1149581#M161316 <P>自己画板子，打板做出来一块，以IMX6D7C和FPGA为主的电路板，现在想通过IAR&nbsp; FOR&nbsp; ARM软件，下载程序（jlink）到电路板，让imx6d7c与FPGA通过EIM，实现数据通讯。</P><P>（I draw a board by myself and create a circuit board based on IMX6D7C and FPGA. Now I want to download a program (jlink) to the circuit board through IAR FOR ARM software, so that imx6d7c and FPGA can communicate with each other through EIM.）</P> Mon, 07 Sep 2020 08:50:06 GMT https://community.nxp.com/t5/i-MX-Processors/imx6d7c%E9%80%9A%E8%BF%87EIM-%E4%B8%8EFPGA%E5%AE%9E%E7%8E%B0%E6%95%B0%E6%8D%AE%E4%B8%8A%E7%9A%84%E9%80%9A%E8%AE%AF-The-imx6d7c-chip-realizes-data/m-p/1149581#M161316 刘洋 2020-09-07T08:50:06Z Re: imx6d7c通过EIM，与FPGA实现数据上的通讯（The imx6d7c chip realizes data communication with FPGA through EIM） https://community.nxp.com/t5/i-MX-Processors/imx6d7c%E9%80%9A%E8%BF%87EIM-%E4%B8%8EFPGA%E5%AE%9E%E7%8E%B0%E6%95%B0%E6%8D%AE%E4%B8%8A%E7%9A%84%E9%80%9A%E8%AE%AF-The-imx6d7c-chip-realizes-data/m-p/1154049#M161915 <P>Basically, we don't support IAR and Jlink using with i.MX6Q.</P> <P>Normally, we use MFGTOOL to program the images.</P> Wed, 16 Sep 2020 09:09:15 GMT https://community.nxp.com/t5/i-MX-Processors/imx6d7c%E9%80%9A%E8%BF%87EIM-%E4%B8%8EFPGA%E5%AE%9E%E7%8E%B0%E6%95%B0%E6%8D%AE%E4%B8%8A%E7%9A%84%E9%80%9A%E8%AE%AF-The-imx6d7c-chip-realizes-data/m-p/1154049#M161915 jimmychan 2020-09-16T09:09:15Z