topic Re: Linux build issue (L3.0.35_4.0.0) in i.MX Processors

Linux build issue (L3.0.35_4.0.0)

keitanagashima — Fri, 26 Jul 2013 13:04:59 GMT

Dear Sir or Madam,

Hello.

I couldn't build the Linux BSP (L3.0.35_4.0.0).

Board: MX6DL SABRE-SDP

BSP: L3.0.35_4.0.0

Host PC: Ubuntu 9.04

I referred to Setting_Up_LTIB_Host.pdf and i.MX_6Solo6DualLite_Sabre-SDP_Linux_User_Gudie.pdf

I tried this command : "./ltib -m config"

But, the build failed.

Refer to attached error log and please tell me advice.

Keita

Original Attachment has been moved to: host_config.log.zip

Re: Linux build issue (L3.0.35_4.0.0)

LeonardoSandova — Mon, 29 Jul 2013 20:03:00 GMT

According to the log, you need to install the texi2dvi before running ltib.

/bin/sh: texi2dvi: command not found

make[2]: *** [flex.pdf] Error 127

make[2]: Leaving directory `/opt/freescale/ltib/usr/src/rpm/BUILD/flex-2.5.37/doc'

make[1]: *** [install-recursive] Error 1

make[1]: Leaving directory `/opt/freescale/ltib/usr/src/rpm/BUILD/flex-2.5.37'

make: *** [install] Error 2

error: Bad exit status from /home/guest/ltib/tmp/rpm-tmp.29045 (%install)

Leo

Re: Linux build issue (L3.0.35_4.0.0)

keitanagashima — Tue, 30 Jul 2013 01:06:19 GMT

Dear Leo,

Hello.

I tried to command of "sudo apt-get install texi2dvi"

But, it couldn't get the texi2dvi package.

And, I tried to build again.

./ltib -m distclean

./ltib

Check the following error log.

Processing platform: Host support packages

============================================

using /home/guest/ltib/config/platform/host/ltib.preconfig

Processing: fake-provides

===========================

Processing: mkspooflinks

==========================

Processing: distcc

====================

Processing: ccache

====================

Processing: m4

================

Processing: bison

===================

Processing: flex

==================

Build path taken because: directory build, no prebuilt rpm,

Cowardly refusing to clobber existing directory:

/opt/freescale/ltib/usr/src/rpm/BUILD/flex-2.5.37

Remove this by hand if you really want to rebuild this package from scratch

Died at ./ltib line 1392.

traceback:

main::build_host_rpms:1392

main::host_checks:1447

main:554

Started: Tue Jul 30 09:40:44 2013

Ended: Tue Jul 30 09:40:45 2013

Elapsed: 1 seconds

These packages failed to build:

flex

Build Failed

===

Keita

Re: Linux build issue (L3.0.35_4.0.0)

hemalgandhi — Tue, 30 Jul 2013 04:19:21 GMT

Hi Keita

Install below package can fix the error

sudo apt-get install texinfo

sudo apt-get install texlive

if you need more info please refer below link.

https://community.freescale.com/message/314749#314749

Regards,

Hemal

Re: Linux build issue (L3.0.35_4.0.0)

LeonardoSandova — Tue, 30 Jul 2013 15:55:12 GMT

Keita,

in case the app you are trying to install is not found, you need to figure out which packages installs the app. Google is your friend, but also the app 'apt-file' (if you do not have it, install it) is. Once installed it you can try:

$ apt-file find texi2dvi

a2ps: /usr/bin/texi2dvi4a2ps

a2ps: /usr/share/man/man1/texi2dvi4a2ps.1.gz

manpages-ja: /usr/share/man/ja/man1/texi2dvi.1.gz

manpages-zh: /usr/share/man/zh_CN/man1/texi2dvi.1.gz

manpages-zh: /usr/share/man/zh_TW/man1/texi2dvi.1.gz

texinfo: /usr/bin/pdftexi2dvi

texinfo: /usr/bin/texi2dvi

texinfo: /usr/share/man/man1/pdftexi2dvi.1.gz

texinfo: /usr/share/man/man1/texi2dvi.1.gz

texinfo-doc-nonfree: /usr/share/doc/texinfo/html/Format-with-texi2dvi.html

texlive-pictures-doc: /usr/share/doc/texlive-doc/support/texdraw/texi2dvi.gz

texlive-pictures-doc: /usr/share/doc/texlive-pictures-doc/support/texdraw/texi2dvi.gz

as you can see, the texinfo package (as suggested by Hemal), is the one you need to install.

Leo

Re: Linux build issue (L3.0.35_4.0.0)

keitanagashima — Wed, 31 Jul 2013 11:34:03 GMT

Hi Hemal,

I tried to below command.

sudo apt-get install texinfo

sudo apt-get install texlive

When I install the texlive, dpkg of package management system was broken...

So, I repair the /etc/texmf/fmt.d/10texlive-latex-base.cnf.

(The following are out of comments.)

#latex pdftex language.dat-translate-file=cp227.tcx *latex.ini

#pdflatex pdftex language.dat-translate-file=cp227.tcx *pdflatex.ini

And, using command of "sudo dpkg --configure -a"

But, LTIB couldn't build the BSP.

Keita

Re: Linux build issue (L3.0.35_4.0.0)

keitanagashima — Tue, 06 Aug 2013 04:12:50 GMT

Hi Leo,

I could see following by apt-file find texi2dvi.

a2ps: /usr/bin/texi2dvi4a2ps

a2ps: /usr/share/man/man1/texi2dvi4a2ps.1.gz

manpages-ja: /usr/share/man/ja/man1/texi2dvi.1.gz

manpages-zh: /usr/share/man/zh_CN/man1/texi2dvi.1.gz

manpages-zh: /usr/share/man/zh_TW/man1/texi2dvi.1.gz

r-base-core: /usr/lib/R/library/tools/help/texi2dvi

r-base-html: /usr/lib/R/library/tools/html/texi2dvi.html

r-base-latex: /usr/lib/R/library/tools/latex/texi2dvi.tex

texinfo: /usr/bin/texi2dvi

texinfo: /usr/share/man/man1/texi2dvi.1.gz

texinfo-doc-nonfree: /usr/share/doc/texinfo/html/Format-with-texi2dvi.html

texlive-pictures-doc: /usr/share/doc/texlive-doc/texdraw/texi2dvi.gz

texlive-pictures-doc: /usr/share/doc/texlive-pictures-doc/texdraw/texi2dvi.gz

I had already installed the texinfo package.

But, the texlive package couldn't be installed by sudo apt-get install texlive (as suggested by Hemal).

When I install the texlive, dpkg of package management system was broken...

Keita

Re: Linux build issue (L3.0.35_4.0.0)

Yuri — Wed, 07 Aug 2013 07:22:27 GMT

Perhaps it makes sense to try recent Ubuntu / Debian releases as a host OS.

i.MX Linux BSP Environment Setup

Re: Linux build issue (L3.0.35_4.0.0)

Yuri — Wed, 07 Aug 2013 07:28:11 GMT

Are old repos applied, as recommended in section 1.2 (Update Sources.list to Point to Old-releases Repository) of "Setting_Up_LTIB_Host.pdf"

Re: Linux build issue (L3.0.35_4.0.0)

keitanagashima — Mon, 26 Aug 2013 06:43:29 GMT

Dear All,

Thank you for your support.

Build succeeded!

I describe my procedure.

=====

[Environment]

Board: MX6DL SABRE-SDP

BSP: L3.0.35_4.0.0

Host PC: Ubuntu 12.04

Virtual Box: 4.2.10

[Install package for LTIB]

sudo aptitude -y install gettext libgtk2.0-dev rpm bison m4 libfreetype6-dev

sudo aptitude -y install libdbus-glib-1-dev liborbit2-dev intltool

sudo aptitude -y install ccache ncurses-dev zlib1g zlib1g-dev gcc g++ libtool

sudo aptitude -y install uuid-dev liblzo2-dev

sudo aptitude -y install tcl dpkg

sudo apt-get install texinfo

sudo apt-get install texlive

[Remove directory]

sudo rm -Rf /opt/freescale/ltib/usr/src/rpm/BUILD/flex-2.5.37

sudo rm -Rf /opt/freescale/ltib/usr/src/rpm/BUILD/libtool-2.4.2

[Change the ltib script]

sudo vi ~ltib/ltib

Comment out (#) the line as shown below in ltib script.

Package Minimum ver Installed info

------- ----------- ---------------

#zlib 0 not installed

=====

Keita