topic Re: i.MX6ULL Compile Error in i.MX Processors

i.MX6ULL Compile Error

ray_deng1 — Sun, 10 May 2020 11:55:04 GMT

Dears,

I did separate compiled for imx-yocto-LF_L5.4.3_1.0.0, and already downloaded all the required components, but when it show below error.

| make[2]: *** No rule to make target 'arch/arm/boot/dts/imx6ull-14x14-evk-usb-certi.dtb'. Stop.

Attached the error log for your reference,

Thanks &BRs,

Ray

Re: i.MX6ULL Compile Error

radhikasomaiya — Mon, 11 May 2020 16:09:08 GMT

Hi ray.deng@avnet.com ,

We are able to build with imx-yocto-LF_L5.4.3_1.0.0 for i.MX6ULL14x14evk. Our host system is ubuntu 16.04.

Our configurations are as per below:

Distro : fsl-imx-wayland

Machine : imx6ull14x14evk

We have tried both images.

Image 1 : core-image-minimal

Image 2 : fsl-image-machine-test

We have followed the steps from Yocto project User's guide.(You can download document's from below link).

https://www.nxp.com/webapp/Download?colCode=L5.4.3_1.0.0_LINUX_DOCS

Can you please give us the steps which you have followed?

Regards,

Radhika Somaiya.

Re: i.MX6ULL Compile Error

joanxie — Tue, 12 May 2020 03:15:39 GMT

what build commands do you use? pls share this, let me double check it

Re: i.MX6ULL Compile Error

ray_deng1 — Tue, 12 May 2020 03:24:54 GMT

Hi Radhika,

Thanks for your response. I use below configurations,

Our configurations are as per below:

Distro : fsl-imx-fb

Machine : imx6ullevk

We have tried both images.

Image 1 : imx-image-full

BRs,

Ray Deng

Field Application

South FAE,Avnet China

深圳市宝安区新安街道创业二路与留仙一路交汇处东侧创芯研发中心1栋5楼

5th Floor, Building 1, Wise R&D Center, Liuxian 1st Road cross Chuangye 2nd Road,69th Block, Boa ’an District,Shenzhen City

O +8675586342385

M +8618026960272

D +8675586342385

F +867558378.0826

avnet.com<https://emea01.safelinks.protection.outlook.com/?url=http%3A%2F%2Favnet.com%2F&data=02%7C01%7Cws.wong%40nxp.com%7Cb1694567060e40ace47208d59de6bc7d%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C636588536688437382&sdata=%2ByRoHs0%2FqgD%2BDwbxAes4iThAy8ghHMQ1AaWisaRqYqs%3D&reserved=0>

发件人: Radhika Somaiya <admin@community.nxp.com>

发送时间: 2020年5月12日 0:09

收件人: Deng, Ray <Ray.Deng@AVNET.COM>

主题: You have been mentioned by Radhika Somaiya in Re: i.MX6ULL Compile Error in NXP Community

NXP Community <https://community.freescale.com/resources/statics/1000/35400-NXP-Community-Email-banner-600x75.jpg>

You have been mentioned

by Radhika Somaiya<https://community.nxp.com/people/radhika.somaiya@volansystech.com?et=notification.mention> in Re: i.MX6ULL Compile Error in NXP Community - View Radhika Somaiya's reference to you<https://community.nxp.com/message/1310130?commentID=1310130&et=notification.mention#comment-1310130>

Re: i.MX6ULL Compile Error

radhikasomaiya — Tue, 12 May 2020 06:18:55 GMT

Hi ray.deng@avnet.com ,

From Table 1. i.MX Yocto project images of attached yocto project user's guide imx-image-full is not supported on i.MX6ULL. These images are only supported for i.MX SoC with hardware graphics, So you cannot build imx-image-full for i.MX6ULL.

Regards,

Radhika Somaiya.

Re: i.MX6ULL Compile Error

ray_deng1 — Tue, 12 May 2020 06:44:43 GMT

Hi Radhika,

Got it , thanks,

BRs,

Ray Deng

Field Application

South FAE,Avnet China

深圳市宝安区新安街道创业二路与留仙一路交汇处东侧创芯研发中心1栋5楼

5th Floor, Building 1, Wise R&D Center, Liuxian 1st Road cross Chuangye 2nd Road,69th Block, Boa ’an District,Shenzhen City

O +8675586342385

M +8618026960272

D +8675586342385

F +867558378.0826

发件人: radhika.somaiya@volansystech.com <admin@community.nxp.com>

发送时间: 2020年5月12日 14:19

收件人: Deng, Ray <Ray.Deng@AVNET.COM>

主题: Re: - Re: i.MX6ULL Compile Error

NXP Community <https://community.freescale.com/resources/statics/1000/35400-NXP-Community-Email-banner-600x75.jpg>

Re: i.MX6ULL Compile Error

reply from Radhika Somaiya<https://community.nxp.com/people/radhika.somaiya@volansystech.com?et=watches.email.thread> in i.MX Processors - View the full discussion<https://community.nxp.com/message/1310405?commentID=1310405&et=watches.email.thread#comment-1310405>

Re: i.MX6ULL Compile Error

donoldham — Wed, 15 Jul 2020 00:10:26 GMT

I am have the same problem. Followed the procedure in the latest NXP yocto guide Rev. L5.4.24_2.1.0, 06/2020

$ mkdir imx-yocto-bsp
$ cd imx-yocto-bsp
$ repo init -u https://source.codeaurora.org/external/imx/imx-manifest
-b imx-linux-zeus -m imx-5.4.24-2.1.0.xml
$ repo sync

DISTRO=fsl-imx-fb MACHINE=imx6ull14x14evk source imx-setup-release.sh -b build

bitbake core-image-minimal

I tried different images, but still get the error

"scripts/kconfig/conf --syncconfig Kconfig"

"make[2]: *** No rule to make target 'arch/arm/boot/dts/imx6ull-14x14-evk-usb-certi.dtb'. Stop"

".../build/tmp/work-shared/recipe for target 'imx6ull-14x14-evk-usb-certi.dtb' failed".

Re: i.MX6ULL Compile Error

joanxie — Thu, 16 Jul 2020 06:58:37 GMT

for 6ull, try to use 5.4.3_1.0.0