topic Re: Is JTAG required to flash images on imx8 custom board in i.MX Processors

Is JTAG required to flash images on imx8 custom board

shilesh_babu — Thu, 18 Jun 2020 13:55:46 GMT

Dear NXP,

we are developing a custom board based on i.MX 8MQuad application processor, for images flashing on board uuu tool or mfg tool is enough jtag is not needed.

as per my understanding jtag used only when on board debugging is required.

Re: Is JTAG required to flash images on imx8 custom board

igorpadykov — Fri, 19 Jun 2020 00:49:42 GMT

Hi Shilesh

you are right jtag is not needed for flashing images, it is

used for debugging.

Best regards
igor
-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

Re: Is JTAG required to flash images on imx8 custom board

shilesh_babu — Fri, 19 Jun 2020 06:21:31 GMT

Thank you for your help igorpadykov, As i am planning to use i.MX 8M Nano custom board, could you please suggest me which are JTAGs are good to debug i.MX 8M Nano custom board.