i.MX ProcessorsのトピックRe: Migration problem MfgTool to uuu https://community.nxp.com/t5/i-MX-Processors/Migration-problem-MfgTool-to-uuu/m-p/1055403#M155222 <HTML><HEAD></HEAD><BODY><P>You can refer to&nbsp; <A href="https://community.nxp.com/message/1187234">https://community.nxp.com/message/1187234</A>&nbsp;</P></BODY></HTML> Wed, 17 Jun 2020 07:17:44 GMT Rita_Wang 2020-06-17T07:17:44Z Migration problem MfgTool to uuu https://community.nxp.com/t5/i-MX-Processors/Migration-problem-MfgTool-to-uuu/m-p/1055402#M155221 <HTML><HEAD></HEAD><BODY><P>I use the MfgTool v1.6.2 to transfer the transfer the WinCE and the application to a iMX28 module (TQMa28 from TQ).</P><P>I want to make a commandline script. the MfgTool v1.6 is only a gui program.</P><P></P><P>I found the MfgTool v3 (uuu) on github. I could not find the information to translate the ucl file.</P><P>the manual and the wiki describe only the translation of ucl2 files.</P><P></P><P>where can i fin the information?</P></BODY></HTML> Wed, 17 Jun 2020 06:45:31 GMT https://community.nxp.com/t5/i-MX-Processors/Migration-problem-MfgTool-to-uuu/m-p/1055402#M155221 fehrlest 2020-06-17T06:45:31Z Re: Migration problem MfgTool to uuu https://community.nxp.com/t5/i-MX-Processors/Migration-problem-MfgTool-to-uuu/m-p/1055403#M155222 <HTML><HEAD></HEAD><BODY><P>You can refer to&nbsp; <A href="https://community.nxp.com/message/1187234">https://community.nxp.com/message/1187234</A>&nbsp;</P></BODY></HTML> Wed, 17 Jun 2020 07:17:44 GMT https://community.nxp.com/t5/i-MX-Processors/Migration-problem-MfgTool-to-uuu/m-p/1055403#M155222 Rita_Wang 2020-06-17T07:17:44Z