i.MX ProcessorsのトピックRe: NDIS Bad Driver Debug Message i.MX28 Windows CE 6.0 https://community.nxp.com/t5/i-MX-Processors/NDIS-Bad-Driver-Debug-Message-i-MX28-Windows-CE-6-0/m-p/223794#M15452 <HTML><HEAD></HEAD><BODY><P><A _jive_internal="true" data-containerid="-1" data-containertype="-1" data-objectid="209412" data-objecttype="3" href="https://community.nxp.com/people/adeneoengineeringteam" style="font-family: 'Helvetica Neue', Helvetica, Arial, 'Lucida Grande', sans-serif; background-color: #ffffff; color: #3778c7;">Adeneo Engineering Team</A><SPAN style="font-family: 'Helvetica Neue', Helvetica, Arial, 'Lucida Grande', sans-serif; background-color: #ffffff;"> Please confirm if you are available to help on this case.</SPAN></P></BODY></HTML> Fri, 24 May 2013 17:33:53 GMT karina_valencia 2013-05-24T17:33:53Z NDIS Bad Driver Debug Message i.MX28 Windows CE 6.0 https://community.nxp.com/t5/i-MX-Processors/NDIS-Bad-Driver-Debug-Message-i-MX28-Windows-CE-6-0/m-p/223792#M15450 <HTML><HEAD></HEAD><BODY><P>Hi all,</P><P></P><P>When I boot my i.MX28 board as a debug build but do not use KITL (debug messages output via serial port) I see the following repeatedly output while the network connection is present:</P><P></P><P>The value of ControlStatus is = 980h</P><P>***NDIS*** (10, 1409) Bad driver, indicating broadcast when not set to.</P><P>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; The value of ControlStatus is = 980h</P><P>***NDIS*** (10, 1409) Bad driver, indicating broadcast when not set to.</P><P>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; The value of ControlStatus is = 980h</P><P>***NDIS*** (10, 1409) Bad driver, indicating broadcast when not set to.</P><P>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; The value of ControlStatus is = 8000h</P><P></P><P>Does anyone know what this could be? When the KITL connection to platform builder is attached I do not see these messages in the debug window.</P><P></P><P>Interestingly with KITL enabled the same image boots without any issues, with KITL disabled it boots up to a point and then starts streaming out messages like above.</P><P></P><P>I also noticed the following debug message:</P><P></P><P>TAPI:OldAddTapiDevice - This BSP is loading TSPs by old method!!! Change registry settings to use new way!!!</P><P></P><P>Does something in the registry need to be changed? I couldn't find any info on this message.</P><P></P><P>Kind regards, Mark</P><P><SPAN class="mce_paste_marker"></SPAN></P></BODY></HTML> Fri, 03 May 2013 14:17:22 GMT https://community.nxp.com/t5/i-MX-Processors/NDIS-Bad-Driver-Debug-Message-i-MX28-Windows-CE-6-0/m-p/223792#M15450 markwilliams 2013-05-03T14:17:22Z Re: NDIS Bad Driver Debug Message i.MX28 Windows CE 6.0 https://community.nxp.com/t5/i-MX-Processors/NDIS-Bad-Driver-Debug-Message-i-MX28-Windows-CE-6-0/m-p/223793#M15451 <HTML><HEAD></HEAD><BODY><P>Deactivated user are you available to help on this case?</P></BODY></HTML> Wed, 08 May 2013 21:13:27 GMT https://community.nxp.com/t5/i-MX-Processors/NDIS-Bad-Driver-Debug-Message-i-MX28-Windows-CE-6-0/m-p/223793#M15451 karina_valencia 2013-05-08T21:13:27Z Re: NDIS Bad Driver Debug Message i.MX28 Windows CE 6.0 https://community.nxp.com/t5/i-MX-Processors/NDIS-Bad-Driver-Debug-Message-i-MX28-Windows-CE-6-0/m-p/223794#M15452 <HTML><HEAD></HEAD><BODY><P><A _jive_internal="true" data-containerid="-1" data-containertype="-1" data-objectid="209412" data-objecttype="3" href="https://community.nxp.com/people/adeneoengineeringteam" style="font-family: 'Helvetica Neue', Helvetica, Arial, 'Lucida Grande', sans-serif; background-color: #ffffff; color: #3778c7;">Adeneo Engineering Team</A><SPAN style="font-family: 'Helvetica Neue', Helvetica, Arial, 'Lucida Grande', sans-serif; background-color: #ffffff;"> Please confirm if you are available to help on this case.</SPAN></P></BODY></HTML> Fri, 24 May 2013 17:33:53 GMT https://community.nxp.com/t5/i-MX-Processors/NDIS-Bad-Driver-Debug-Message-i-MX28-Windows-CE-6-0/m-p/223794#M15452 karina_valencia 2013-05-24T17:33:53Z