i.MX Processors中的主题 Re: Incorrect SECO FW Version

Incorrect SECO FW Version

stuartrubin — Fri, 17 Apr 2020 16:09:07 GMT

I am using an iMX8QM-MEK board and making a custom SCU Firmware (scfw_tcm.bin). With the debug monitor enabled, upon boot, I get the following error:

"Incorrect SECO FW Version 2.3.1 (2.5.4 or later required)"

This error should be self evident. Nonetheless, I can't seem to find versions of the SCFW Porting Kit and the SECO firmware (mx8qm-ahab-container.img) with these versions.

Things seem to work, but how would I know that they were not. Or maybe there is some feature that I have not yet used which will break.

I am building the SCFW with imx-scfw-porting-kit-1.3.0.

The SECO firmware (mx8qm-ahab-container.img) was extracted from "firmware-imx-8.1".

Am I doing something wrong or can someone please steer me towards two compatible versions of the SECO firmware and the SCFW kit?

Thank you

Re: Incorrect SECO FW Version

joanxie — Mon, 20 Apr 2020 01:55:27 GMT

what bsp version do you use? let me check the version, it seems your version doesn't match, You can get it using Yocto to fetch firmware-imx package or from this link: https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/*.bin

Re: Incorrect SECO FW Version

thomasschaefer — Mon, 11 May 2020 13:19:10 GMT

SECO firmware has been moved from firmware-imx into separate container: https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/imx-seco-2.5.4.bin

Re: Incorrect SECO FW Version

Dante — Thu, 25 Nov 2021 05:52:10 GMT

How to use Yocto to get *.bin ,Can you give some detail steps ?