i.MX ProcessorsのトピックKernel Image not found in imx6 booting

Kernel Image not found in imx6 booting

nikhil_sahu2 — Mon, 01 Jun 2020 16:32:16 GMT

I compiled the yocto zeus imx6sabresd images and flashing the below images through mfgtool which i downloaded from below link.

https://www.nxp.com/design/i-mx-developer-resources/i-mx-software-and-development-tools:IMX-SW

Images:

core-image-base-imx6sxsabresd.tar.bz2

imx6sx-sdb.dtb

u-boot-imx6sxsabresd.imx

zImage

Now when i am flashing the images its not getting the kernel address. i want to boot this from eMMC.

U-Boot 2019.04-lf-5.4.y_v2019.04+g228843cdf5 (May 31 2020 - 17:38:47 +0000)

CPU:   Freescale i.MX6SX rev1.3 at 792MHz

CPU:   Industrial temperature grade (-40C to 105C) at 41C

Reset cause: POR

Model: Freescale i.MX6 SoloX SDB RevB Board

Board: MX6SX SABRE SDB rev@

DRAM:  1 GiB

PMIC: PFUZE100! DEV_ID=0x11 REV_ID=0x21

MMC:

Loading Environment from MMC... MMC Device 2 not found

*** Warning - No MMC card found, using default environment

Display: Hannstar-XGA (1024x768)

Video: 1024x768x18

In:    serial

Out:   serial

Err:   serial

No MMC device available

flash target is MMC:2

MMC Device 2 not found

invalid mmc device 2

Net:

Warning: ethernet@02188000 (eth0) using random MAC address - 16:c6:8c:71:c0:1e

eth0: ethernet@02188000 [PRIME]

Warning: ethernet@021b4000 (eth1) using random MAC address - c2:37:f4:1b:c3:e4

, eth1: ethernet@021b4000

Fastboot: Normal

Normal Boot

Hit any key to stop autoboot:  0

********TP_19 not Pressed [0] : Normal mode********

No MMC device available

No MMC device available

Booting from net ...

ethernet@02188000 Waiting for PHY auto negotiation to complete......... TIMEOUT                                                                                                                                                              !

Could not initialize PHY ethernet@02188000

BOOTP broadcast 1

BOOTP broadcast 2

BOOTP broadcast 3

BOOTP broadcast 4

BOOTP broadcast 5

BOOTP broadcast 6

BOOTP broadcast 7

BOOTP broadcast 8

BOOTP broadcast 9

BOOTP broadcast 10

BOOTP broadcast 11

BOOTP broadcast 12

BOOTP broadcast 13

BOOTP broadcast 14

BOOTP broadcast 15

BOOTP broadcast 16

BOOTP broadcast 17

Retry time exceeded; starting again

ethernet@02188000 Waiting for PHY auto negotiation to complete......... TIMEOUT !

Could not initialize PHY ethernet@02188000

BOOTP broadcast 1

BOOTP broadcast 2

BOOTP broadcast 3

BOOTP broadcast 4

BOOTP broadcast 5

BOOTP broadcast 6

BOOTP broadcast 7

BOOTP broadcast 8

BOOTP broadcast 9

BOOTP broadcast 10

BOOTP broadcast 11

BOOTP broadcast 12

BOOTP broadcast 13

BOOTP broadcast 14

BOOTP broadcast 15

BOOTP broadcast 16

BOOTP broadcast 17

Retry time exceeded; starting again

Bad Linux ARM zImage magic!

Experts please let me know is this mfgtool version is compitible with zeus yocto. or can we generate our own mfgtool with customized chanegs. And what could be the issue in booting.

Thanks in advance,

Regards,

Nikhil

Re: Kernel Image not found in imx6 booting

AldoG — Tue, 02 Jun 2020 16:12:27 GMT

Hello,

Please try with the latest MFGTool UUU, you may download it from here:

https://github.com/NXPmicro/mfgtools/releases/tag/uuu_1.3.154

uuu -> Linux version

uuu.exe -> Windows version

UUU.pdf -> Tool documentation

Flash using .sdcard/.wic files into eMMC you may run the following command:

uuu -b emmc_all bootloader rootfs.sdcard

Flash yocto image to eMMC by linux kernel you may use the script I'll attach, using the following command:

uuu example_kernel_emmc.uuu

If using the linux kernel method you need to replace below items with actually file names in the script.

# @_flash.bin | boot loader

# @_Image | kernel image, arm64 is Image, arm32 it is zImage

# @_board.dtb | board dtb file

# @_initramfs.cpio.gz.uboot | mfgtool init ramfs

# @_rootfs.tar.bz2 | rootfs

# @_uTee.tar | optee image

Hope this help,

Best regards,

Aldo.

Re: Kernel Image not found in imx6 booting

nikhil_sahu2 — Wed, 10 Jun 2020 11:19:43 GMT

Hi @Aldo,

Thanks for the reply, I want to flash using linux kernel method. But i dont have all the images which required to modify as per the script.

# @_flash.bin | boot loader (No, but can we use u-boot.imx here?)

# @_Image | kernel image, arm64 is Image, arm32 it is zImage (yes)

# @_board.dtb | board dtb file (yes)

# @_initramfs.cpio.gz.uboot | mfgtool init ramfs (No)

# @_rootfs.tar.bz2 | rootfs (Yes)

# @_uTee.tar | optee image (No)

I compiled the image (bitbake core-image-base) and the generated binaries i attached in screenshot.

Please let us know, how we can achieve all the mentioned image as per the script.

Thanks,

Nikhil

Re: Kernel Image not found in imx6 booting

AldoG — Fri, 12 Jun 2020 23:10:32 GMT

Hello,

Can we use u-boot.imx here?

Yes no problem

mfgtool init ramfs (No)

Please try with the attached file

optee image (No)

Please try to comment line 82 and 83 from script.

Hope this helps,

Best regards,

Aldo.

Re: Kernel Image not found in imx6 booting

nikhil_sahu2 — Sun, 14 Jun 2020 09:43:31 GMT

Hello Aldo,

Below is the output what i tried.

nik@ubuntu:~/example_kernel_emmc_all.uuu$ ls

core-image-base-imx6sxsabresd.tar.bz2 example_kernel_emmc_flash.uuu imx6sx-sdb.dtb u-boot-imx6sxsabresd.imx uuu UUU.pdf zImage
nik@ubuntu:~/example_kernel_emmc_all.uuu$ sudo ./uuu example_kernel_emmc_flash.uuu
uuu (Universal Update Utility) for nxp imx chips -- libuuu_1.3.154-0-g47ddef5

Success 0 Failure 0

1:1 1/ 1 [=================100%=================] SDP: boot -f u-boot-imx6sxsabresd.imx

And it stopped after this, what about the other images flashing. Attaching the script which i modified as per your direction.

Re: Kernel Image not found in imx6 booting

AldoG — Wed, 17 Jun 2020 16:32:40 GMT

Hello,

I made some changes to the file you have attached, I also notice that in my previous comment didn’t attach the file you were missing please find it here as well.

Note: you may find fsl-image-mfgtool-initramfs-imx_mfgtools.cpio.gz.u-boot inside our pre-compiled BSP that’s where I took it from:

https://www.nxp.com/webapp/Download?colCode=L5.4.3_1.0.0_MX6QDLSOLOX&appType=license

Changes I made on your script:
u-boot-imx6sxsabresd.imx -> u-boot-imx6sxsabresd.imx-emmc

_initramfs.cpio.gz.uboot -> fsl-image-mfgtool-initramfs-imx_mfgtools.cpio.gz.u-boot

Please add those 2 files and try it, let me know if it worked.

Thank you,

Best regards,
Aldo.