iMXRT reboot

mspenard603 — Sun, 19 Jan 2020 04:09:09 GMT

How does one reboot, in software, an iMXRT1062?

Re: iMXRT reboot

jeremyzhou — Sun, 19 Jan 2020 09:06:48 GMT

Thank you for your interest in NXP Semiconductor products and for the opportunity to serve you.
Actually, I'm not very clear about your question, please you can clarify it.

TIC

-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "Mark Correct" button. Thank you!

- We are following threads for 7 weeks after the last post, later replies are ignored
Please open a new thread and refer to the closed one, if you have a related question at a later point in time.
-------------------------------------------------------------------------------

Re: iMXRT reboot

mspenard603 — Sun, 19 Jan 2020 17:45:21 GMT

Sure, I'm simply looking for a way to make a call that reboots the MCU.

Re: iMXRT reboot

jeremyzhou — Mon, 02 Nov 2020 14:36:21 GMT

Hi Mike,

Thanks for your reply.
it can make the RT1062 reboot via calling NVIC_SystemReset();
I've attached a sample code that inherits from the hello_world demo in the SDK library. And the testing result is also presented below.

/*
 * Copyright (c) 2013 - 2015, Freescale Semiconductor, Inc.
 * Copyright 2016-2017 NXP
 * All rights reserved.
 *
 * SPDX-License-Identifier: BSD-3-Clause
 */

#include "fsl_device_registers.h"
#include "fsl_debug_console.h"
#include "board.h"

#include "pin_mux.h"
#include "clock_config.h"
/*******************************************************************************
 * Definitions
 ******************************************************************************/


/*******************************************************************************
 * Prototypes
 ******************************************************************************/

/*******************************************************************************
 * Code
 ******************************************************************************/
/*!
 * @brief Main function
 */
int main(void)
{
    char ch;

    /* Init board hardware. */
    BOARD_ConfigMPU();
    BOARD_InitPins();
    BOARD_BootClockRUN();
    BOARD_InitDebugConsole();

    PRINTF("\r\n hello world.\r\n");

    while (1)
    {
        ch = GETCHAR();
        if(ch == 'y')
        {
          NVIC_SystemReset();
        }
        PUTCHAR(ch);
    }
}
‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍

TIC

-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "Mark Correct" button. Thank you!

i.MX ProcessorsのトピックRe: iMXRT reboot

iMXRT reboot

Re: iMXRT reboot

Re: iMXRT reboot

Re: iMXRT reboot