iMX6ul evk board sai1 using

ATAineri — Sat, 09 Nov 2019 10:19:26 GMT

There is no SAI on iMX6ul EVK board. I found that CSI on board can be multiplexing like SAI1 for iMX6ul. Moreover there is i2c that I need for my external audio device.

Can I solder my connector to this pins I need? Or maybe the binding of these pins does not meet the standards of i2s and this lines is totally incompatible for I2S using?

Re: iMX6ul evk board sai1 using

weidong_sun — Mon, 11 Nov 2019 03:04:06 GMT

Hi,

>>Can I solder my connector to this pins I need?

Yes, you can.

But in device tree, you should ask software engineer to remove configurations on Camera. and add IOMUX of CSI pins( Multiplexed them to be SAI1 pins)

>>Or maybe the binding of these pins does not meet the standards of i2s and this lines is totally incompatible for I2S using?

These pins supports the standards of i2s, usage is fully same as that of SAI2 with I2S connection, see EVK schematic, please!

Have a nice day!

BR,

Weidong

i.MX ProcessorsのトピックiMX6ul evk board sai1 using

iMX6ul evk board sai1 using

Re: iMX6ul evk board sai1 using