mfgtool2 damage two pico-imx7d SOM modules. Where it spoiled?

neuberfran — Thu, 26 Dec 2019 14:32:37 GMT

Hi,

I have this issue: My other imx7d pico android things start kit died, again

I was following the steps of this link: iMX7D Pico won't boot

I used the <LIST name = "eMMC-Brillo-uboot" script from ucl2.xml file

I left the script running beyond time. After Done appeared on the screen it was still running for about 8 minutes.

I think I found out what burned my devices. And the answer is in the link/iIMAGE below (despite being another SOM)

https://developer.solid-run.com/knowledge-base/efuses-for-imx6-som/.

My questions is: What component did it damage? How to make sure which component(s) burned? Why it spoiled?

Re: mfgtool2 damage two pico-imx7d SOM modules. Where it spoiled?

Rita_Wang — Sun, 19 Jan 2020 10:03:49 GMT

I’m afraid that the i.MX7D Pico board is manufactured and supported by TechNexion so I would recommend that you contact them especially if you are facing hardware issues.

i.MX ProcessorsのトピックRe: mfgtool2 damage two pico-imx7d SOM modules. Where it spoiled?

mfgtool2 damage two pico-imx7d SOM modules. Where it spoiled?

Re: mfgtool2 damage two pico-imx7d SOM modules. Where it spoiled?