topic Re: BSDL FILE MX6S in i.MX Processors

BSDL FILE MX6S

tommaso_astolfi — Tue, 10 Mar 2020 13:16:34 GMT

Where Can I Get bsdl File Of MCIMX6S1AVM08AC For Boundary SCAN

Re: BSDL FILE MX6S

gusarambula — Tue, 10 Mar 2020 16:36:59 GMT

Hello Tommaso Astolfi,

The BSDL file for the i.MX6S can be found on the Tools and Software section of the i.MX6Solo webpage under Design Tools & Files and then Models.

Here is the direct link for the BSDL file, please note that you may need to login to download this file:

https://www.nxp.com/webapp/Download?colCode=IMX6_DL_S_BSDL&appType=license

I hope this helps!

Regards,

Re: BSDL FILE MX6S

tommaso_astolfi — Wed, 18 Mar 2020 08:59:25 GMT

I used the files you reported, but despite having the silkscreen of the

component the same as the one reread by the BSDL model, when I run the

infrastructure test I get a pn error on a bit.

I attach an error screen

the diagnostic answers the wrong component.

I think the file is not the right one. Do you have any suggestions?

Yours sincerely

Tommaso Astolfi

I&D Manufacturing Department

Direct Phone: +39 075 89800346, +39 075 89800270

Fax: +39 075 8987215

email: tommaso.astolfi@eles.com

www.eles.com

ELES Semiconductor Equipment SpA

Sede legale - Fraz. Pian di Porto – Z.I. Bodoglie, 148/1/Z - 06059 Todi

(PG) Italy

P. Iva - IT 01844830545

CF e Registro Imprese di Perugia n. 01844830545 – REA n. 163060

Capitale Sociale euro 4.000.000 i.v.

Il giorno mar 10 mar 2020 alle ore 17:37 gusarambula <

admin@community.nxp.com> ha scritto:

NXP Community
<https://community.freescale.com/resources/statics/1000/35400-NXP-Community-Email-banner-600x75.jpg>
Re: BSDL FILE MX6S
reply from gusarambula
<https://community.nxp.com/people/gusarambula?et=watches.email.thread> in *i.MX
Processors* - View the full discussion
<https://community.nxp.com/message/1281254?commentID=1281254&et=watches.email.thread#comment-1281254>

Re: BSDL FILE MX6S

tommaso_astolfi — Wed, 18 Mar 2020 10:33:38 GMT

Solved

cancel request

Tommaso Astolfi

I&D Manufacturing Department

Direct Phone: +39 075 89800346, +39 075 89800270

Fax: +39 075 8987215

email: tommaso.astolfi@eles.com

www.eles.com

ELES Semiconductor Equipment SpA

Sede legale - Fraz. Pian di Porto – Z.I. Bodoglie, 148/1/Z - 06059 Todi

(PG) Italy

P. Iva - IT 01844830545

CF e Registro Imprese di Perugia n. 01844830545 – REA n. 163060

Capitale Sociale euro 4.000.000 i.v.

Il giorno mer 18 mar 2020 alle ore 09:58 Tommaso Astolfi <

tommaso.astolfi@eles.com> ha scritto:

hi
I used the files you reported, but despite having the silkscreen of the
component the same as the one reread by the BSDL model, when I run the
infrastructure test I get a pn error on a bit.
I attach an error screen
the diagnostic answers the wrong component.
I think the file is not the right one. Do you have any suggestions?
Yours sincerely

Tommaso Astolfi
I&D Manufacturing Department
Direct Phone: +39 075 89800346, +39 075 89800270
Fax: +39 075 8987215
email: tommaso.astolfi@eles.com
www.eles.com
ELES Semiconductor Equipment SpA
Sede legale - Fraz. Pian di Porto – Z.I. Bodoglie, 148/1/Z - 06059 Todi
(PG) Italy
P. Iva - IT 01844830545
CF e Registro Imprese di Perugia n. 01844830545 – REA n. 163060
Capitale Sociale euro 4.000.000 i.v.

Il giorno mar 10 mar 2020 alle ore 17:37 gusarambula <
admin@community.nxp.com> ha scritto:

>> NXP Community

>> <https://community.freescale.com/resources/statics/1000/35400-NXP-Community-Email-banner-600x75.jpg>

>> Re: BSDL FILE MX6S

>> reply from gusarambula

>> <https://community.nxp.com/people/gusarambula?et=watches.email.thread>

>> in i.MX Processors - View the full discussion

>> <https://community.nxp.com/message/1281254?commentID=1281254&et=watches.email.thread#comment-1281254>

Re: BSDL FILE MX6S

gusarambula — Wed, 18 Mar 2020 22:22:28 GMT

Hello Tommaso Astolfi,

I'm glad you solved this problem! If it's feasible, sharing the solution may help other Community Users.

Regards,

Re: BSDL FILE MX6S

tommaso_astolfi — Thu, 19 Mar 2020 06:40:16 GMT

Good morning

I don't know if it is relevant globally, but what I found is that my test

consists of two jtag chains with a device for each chain, each interfaced

with a different tap.

In the automatic configuration generated by the sw, I had tap1 on u11 a pld

altera 5agxma5g4f35c5n, tap 2 on U1 a mcimx6s1avm08ac and the infra test is

performed without fail.

To align the screen printing of the card with the taps, I have inverted the

assignment of the two taps, tap1 on U1 and tap2 on u11 at sw level,

inexplicably the error of re-reading the id code of the mcimx6 returns

persistently. I attach the two screens.

By returning the tap configuration to the original configuration, the error

disappears.

I solved it at the moment and sent a report to the sw manufacturer.

Regards

Tommaso Astolfi

I&D Manufacturing Department

Direct Phone: +39 075 89800346, +39 075 89800270

Fax: +39 075 8987215

email: tommaso.astolfi@eles.com

www.eles.com

ELES Semiconductor Equipment SpA

Sede legale - Fraz. Pian di Porto – Z.I. Bodoglie, 148/1/Z - 06059 Todi

(PG) Italy

P. Iva - IT 01844830545

CF e Registro Imprese di Perugia n. 01844830545 – REA n. 163060

Capitale Sociale euro 4.000.000 i.v.

Il giorno mer 18 mar 2020 alle ore 23:23 gusarambula <

admin@community.nxp.com> ha scritto:

NXP Community
<https://community.freescale.com/resources/statics/1000/35400-NXP-Community-Email-banner-600x75.jpg>
Re: BSDL FILE MX6S
reply from gusarambula
<https://community.nxp.com/people/gusarambula?et=watches.email.thread> in *i.MX
Processors* - View the full discussion
<https://community.nxp.com/message/1285428?commentID=1285428&et=watches.email.thread#comment-1285428>

Re: BSDL FILE MX6S

gusarambula — Fri, 20 Mar 2020 21:19:06 GMT

Hello Tommaso Astolfi,

Thank you for taking the time to explain your setup!

Regards,