signed Kernel image and signed dtb launch

antonio_santagi — Tue, 24 Mar 2020 16:23:43 GMT

Hello,

once u-boot determines with hab_auth_img() that signed kernel image is correct and signed dtb file is correct , which is the correct command to launch that kernel image ? is it needed to extract the start address from boot data table or is there already a command for this ?

And for the dtb ?

thank you

Re: signed Kernel image and signed dtb launch

Yuri — Mon, 06 Apr 2020 04:37:13 GMT

Hello,

You may look at bootcmd command of U-boot in its environment.

Have a great day,

Yuri.

-------------------------------------------------------------------------------

Note:

- If this post answers your question, please click the "Mark Correct" button. Thank you!

- We are following threads for 7 weeks after the last post, later replies are ignored

Please open a new thread and refer to the closed one, if you have a related question at a later point in time.

i.MX ProcessorsのトピックRe: signed Kernel image and signed dtb launch

signed Kernel image and signed dtb launch

Re: signed Kernel image and signed dtb launch