topic Welcome to all the new members since last time! in i.MX Processors

Welcome to all the new members since last time!

ChrisWood — Fri, 11 Jun 2010 02:53:48 GMT

My hope is that we can create an environment in this group where we can
share our experiences with the i.MX233 and help each other to solve
problems and perhaps see what others are doing with this wonderful chip.

CW

Re: Welcome to all the new members since last time!

kamejoko80 — Thu, 13 Jan 2011 03:29:39 GMT

Hi,

I've built my own i.MX233 (128 LPFQ) custome board. I'm using the linux-2.6.31 and ported it into the board.Everything is ok accept the TV video output does not work.

Would you please show me how to config the kernel TVENC driver for the i.MX233 128 LPFQ ?

Thanks in advance.

M. Phuong

Re: Welcome to all the new members since last time!

ChrisWood — Thu, 20 Jan 2011 02:10:26 GMT

Hello Minh Phuong, we have not used the TV video output of the i.MX233 before. Perhaps someone else on this forum can help?? If not I suggest that you contact Freescale on-line support which is excellent.

Regards,
chris

Minh Phuong said:

Hi,

I've built my own i.MX233 (128 LPFQ) custome board. I'm using the linux-2.6.31 and ported it into the board.Everything is ok accept the TV video output does not work.
Would you please show me how to config the kernel TVENC driver for the i.MX233 128 LPFQ ?

Thanks in advance.
M. Phuong