Programming eMMC from user space

eren_yilmaz — Thu, 19 Dec 2019 14:41:11 GMT

Is there a way of accessing eMMC to replace the u-boot image, the device-tree etc. from user space?

The only tool I could find is mmc-utils and it does not allow erasing or writing on the flash.

Thanks!

Re: Programming eMMC from user space

igorpadykov — Thu, 19 Dec 2019 23:32:09 GMT

Hi Eren

one can check

How to upgrade Linux Kernel and dtb on eMMC without UUU

https://boundarydevices.com/programming-emmc-on-i-mx6/

Mfg Tool scripts (ucl2.xml) on link i.MX Software and Development Tools | NXP

Mfg Tool is running small linux image and scripts are used for programming external memories.

Best regards
igor
-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

i.MX ProcessorsのトピックProgramming eMMC from user space

Programming eMMC from user space

Re: Programming eMMC from user space