i.MX ProcessorsのトピックUse CSI interface to send data

Use CSI interface to send data

1603354597 — Mon, 09 Mar 2020 09:52:20 GMT

hi,

I have an i.mx8mq evk with a dsi interface and a csi interface , I want to know is there any way to make csi work as dsi. Actually, I want to use CSI interface to send DSI's data.

Any answer will be helpful.

Re: Use CSI interface to send data

igorpadykov — Tue, 10 Mar 2020 04:08:21 GMT

Hi 王澳

unfortunately mipi-csi can be used only for data input, may be useful

to look at its documentation on:

MIPI Camera Serial Interface 2 (MIPI CSI-2)

Best regards
igor
-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

Re: Use CSI interface to send data

1603354597 — Tue, 10 Mar 2020 05:30:26 GMT

Hi igo

Thank you for your reply, by the way, if I configure CSI as DSI in the dts file, is that effective？

Let me put it another way，could CSI's hardware interface be configured as DSI? I want to use two mipi panels, sadly only one DSI on the i.mx8mq evk.

Best regards

澳刚