i.MX Processors中的主题 Re: HOW TO start working on imx6 solox processor using yacto

HOW TO start working on imx6 solox processor using yacto

ramakrishnathum — Sun, 22 Mar 2020 07:23:28 GMT

I have to start working on imx6 solox processor

1.How to get the imx6 solox SDK and required documents like Yacto documentation, data sheets, and reference manual.

Re: HOW TO start working on imx6 solox processor using yacto

kunalkotecha1 — Mon, 23 Mar 2020 17:15:01 GMT

Hi ramakrishnathumu.tech@gmail.com,

Please refer to the below links for i,MX6SoloX related documents:

i.MX 6SoloX Applications Processors | Arm® Cortex®-A9, Cortex-M4 | NXP

i.MX Software and Development Tools | NXP

Regards,

Kunal

Re: HOW TO start working on imx6 solox processor using yacto

gusarambula — Tue, 24 Mar 2020 23:33:08 GMT

Hello Ramakrishna Thumu,

To the list of useful resources Kunal mentioned, I would add the Linux for i.MX landing page:

https://www.nxp.com/design/software/embedded-software/linux-software-and-development-tools/embedded-linux-for-i-mx-applications-processors:IMXLINUX

I would recommend starting with the documentation for thee Kernel revision you are interested in. The latest Linux BSP release with support for the i.MX6SX would be L4.14.98_2.3.1. These BSP releases support NXP boards only. Once you download the documentation a good starting point is the included i.MX Yocto Project User’s Guide.

If you will be using a third-party board, it may also be good to check the Community BSP. You can see the documentation for this BSP on the link below:

http://freescale.github.io/

I hope this helps!

Regards,

Re: HOW TO start working on imx6 solox processor using yacto

ramakrishnathum — Wed, 01 Apr 2020 08:14:30 GMT

Thanks for the help,

Any application note for emmc upgrade using A/B upgrade mechanism?

Re: HOW TO start working on imx6 solox processor using yacto

kunalkotecha1 — Wed, 01 Apr 2020 17:05:18 GMT

Hi ramakrishnathumu.tech@gmail.com,

You can refer to the below links for implementing the OTA.

Regards,

Kunal