IMX6ULL Processor canfd clock

pooja_todakar — Fri, 15 Nov 2019 06:42:55 GMT

hii,

i am installing the tcan4x5x canfd driver processor used is imx6ull,

i had apply cclk(can clock) of 40Mhz.in hardware it is external crystal oscillator,

how can i enable the clock in software?

one host clock given by spi interface.another clock for canfd i have to give.

Re: IMX6ULL Processor canfd clock

igorpadykov — Fri, 15 Nov 2019 09:47:59 GMT

Hi Pooja

one can look at tcan4x5x schematic and dts example

http://www.ti.com/lit/ug/sllu281a/sllu281a.pdf

linux/tcan4x5x.txt at master · torvalds/linux · GitHub

so except spi no other clocks are needed from i.mx side.

Best regards
igor
-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

topic IMX6ULL Processor canfd clock in i.MX Processors

IMX6ULL Processor canfd clock

Re: IMX6ULL Processor canfd clock