topic Re: How to setup MCIMX8QXP-CPU Evaluation board at USB Host? in i.MX Processors

How to setup MCIMX8QXP-CPU Evaluation board at USB Host?

anaseem — Wed, 13 Nov 2019 20:04:15 GMT

I'm booting from SD card that came with the evaluation board. I'm booting with embedded Linux distribution that came with the board.

When I connect my usb device to USB Type C connector, does evaluation board think I connected a usb host?

Attached are log when usb device is connected to evaluation board and when device is removed from evaluation board.

If evaluation board is setup as usb device, how can I set it up as usb host?

Re: How to setup MCIMX8QXP-CPU Evaluation board at USB Host?

CarlosCasillas — Fri, 15 Nov 2019 23:53:47 GMT

Hi Amer,

I’m afraid that i.MX8QXP family is still on preproduction, and we cannot provide additional information or support through this channel yet. In case of requiring help about i.MX8X, please directly contact with your Sales/FAE.

Hope this will be useful for you.
Best regards!
/Carlos
-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "Mark Correct" button. Thank you!

-------------------------------------------------------------------------------

Re: How to setup MCIMX8QXP-CPU Evaluation board at USB Host?

anaseem — Mon, 18 Nov 2019 14:43:36 GMT

>> When I connect my usb device to USB Type C connector, does evaluation board think I connected a usb host?

i. MX8QXP evaluation board is detecting USB devices because when I connect well know USB device, like USB Memory Stick, it gets detected.