i.MX8M Mini i2c clock debug

m_c — Wed, 27 Nov 2019 01:27:26 GMT

Customer would like to change i2c clock by modify device tree, but seems not work.

So we want to debug it by dump related register.

Is it right to dump below register for i2c1 clock because memtool return zero?

root@imx8mmevk:~# /unit_tests/memtool -32 0x3038AD00 1

Reading 0x1 count starting at address 0x3038AD00

0x3038AD00: 00000000

root@imx8mmevk:~# /unit_tests/memtool -32 0x3038AD80 1

Reading 0x1 count starting at address 0x3038AD80

0x3038AD80: 00000000

root@imx8mmevk:~# /unit_tests/memtool -32 0x3038AE00 1

Reading 0x1 count starting at address 0x3038AE00

0x3038AE00: 00000000

root@imx8mmevk:~# /unit_tests/memtool -32 0x3038AE80 1

Reading 0x1 count starting at address 0x3038AE80

0x3038AE80: 00000000

i2c-1

i2c-2

Re: i.MX8M Mini i2c clock debug

igorpadykov — Mon, 02 Dec 2019 10:06:38 GMT

Hi m.c.

seems you successfully used memtool with i.MX8M Mini on https://community.nxp.com/message/1175392

For clock change with dts one can look at examples on:

i.MX7D 24MHz clock output to CCM_CLK1_P pin

Where pll4_bypass_src is set to choose osc 24MHz or CLK2_N/P as source in linux BSP code?

Best regards
igor
-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

i.MX ProcessorsのトピックRe: i.MX8M Mini i2c clock debug

i.MX8M Mini i2c clock debug

Re: i.MX8M Mini i2c clock debug