i.MX ProcessorsのトピックRe: Yocto&Soft AP

Yocto&Soft AP

li_hong — Tue, 12 Nov 2019 11:19:16 GMT

Hi, Team:

I try using soft AP based on yocto. When I run the command of "hostapd -B /etc/hostapd.conf -dd", the hot spot can be found , but my phone can't connect to it。

I've uploaded a image that show my connection status.

How to modify the file named “/etc/hostapd.conf” or other ways to solve this problem.

Re: Yocto&Soft AP

diegoadrian — Tue, 12 Nov 2019 22:51:25 GMT

Hello,

Have you tried adding the recipe into the Yocto building?

If no, please make it as following:

IMAGE_INSTALL_append = “ hostapd”

Hope this could help you.

Best regards,

Diego.

Re: Yocto&Soft AP

li_hong — Wed, 13 Nov 2019 01:58:34 GMT

Hello，

Thank you for your reply.

The recipe named hostapd is already in the Yocto building.

Best regard

Re: Yocto&Soft AP

diegoadrian — Wed, 27 Nov 2019 16:52:54 GMT

Hello,

I apologize for the delay.

Remember that the Recipe needs some dependencies, do you have them?

initscripts
libnl
openssl
pkgconfig-native
update-rc.d

Best regards,

Diego.

Re: Yocto&Soft AP

romitchatterjee — Fri, 29 Nov 2019 07:15:36 GMT

Hello,

Since you can see the hotspot, I guess hostapd is working. Can you share your hostapd.conf file? Are you running udhcpd on your board?