i.MX ProcessorsのトピックRe: iMX8 eDP connection https://community.nxp.com/t5/i-MX-Processors/iMX8-eDP-connection/m-p/973558#M144919 <HTML><HEAD></HEAD><BODY><P>Hello Alex Gutman,</P><P></P><P>The Variscite i.MX8 board is manufactured and supported by Variscite. I would recommend that you reach to them as you would need to check if the port is enabled in their BSP.</P><P></P><P>My apologies for the inconvenience.</P><P>Regards,</P></BODY></HTML> Mon, 28 Oct 2019 21:36:55 GMT gusarambula 2019-10-28T21:36:55Z iMX8 eDP connection https://community.nxp.com/t5/i-MX-Processors/iMX8-eDP-connection/m-p/973557#M144918 <HTML><HEAD></HEAD><BODY><P style="margin-bottom: 8.0pt; background: white;"><SPAN style="color: #222222;">Hi,</SPAN></P><P style="margin-bottom: 8.0pt; background: white;"><SPAN style="color: #222222;">I’m trying to connect Variscite iMX8 board to eDP screen (InnoLux N140HCA). </SPAN></P><P style="margin-bottom: 8.0pt; background: white;"><SPAN style="color: #222222;">I’m using Debian release from Variscite (<A href="http://variwiki.com/index.php?title=Debian_Build_Release&amp;release=RELEASE_STRETCH_V1.0_DART-MX8M">http://variwiki.com/index.php?title=Debian_Build_Release&amp;release=RELEASE_STRETCH_V1.0_DART-MX8M</A>)</SPAN></P><P style="margin-bottom: 8.0pt; background: white;"><SPAN style="color: #222222;">The kernel printouts say that the display system has successfully initiated, I can see correct display parameters including display type, rate, resolution etc, but the screen stays black with no signs of life. The same software</SPAN> <SPAN style="color: #222222;">works correctly with DP screen.</SPAN></P><P style="margin-bottom: 8.0pt; background: white;"><SPAN style="color: #222222;">Is eDP supported by NXP Linux? &nbsp;Is there any “off the shelf” iMX8 based solutions with eDP connection? &nbsp;I’m looking for any hints about eDP enabling with iMX8</SPAN></P><P style="margin-bottom: 8.0pt; background: white;"></P></BODY></HTML> Mon, 28 Oct 2019 09:31:17 GMT https://community.nxp.com/t5/i-MX-Processors/iMX8-eDP-connection/m-p/973557#M144918 alex_g 2019-10-28T09:31:17Z Re: iMX8 eDP connection https://community.nxp.com/t5/i-MX-Processors/iMX8-eDP-connection/m-p/973558#M144919 <HTML><HEAD></HEAD><BODY><P>Hello Alex Gutman,</P><P></P><P>The Variscite i.MX8 board is manufactured and supported by Variscite. I would recommend that you reach to them as you would need to check if the port is enabled in their BSP.</P><P></P><P>My apologies for the inconvenience.</P><P>Regards,</P></BODY></HTML> Mon, 28 Oct 2019 21:36:55 GMT https://community.nxp.com/t5/i-MX-Processors/iMX8-eDP-connection/m-p/973558#M144919 gusarambula 2019-10-28T21:36:55Z