https://community.nxp.com/t5/i-MX-Processors/i-MX8QXP-MEK-Board-differences-between-PCB-rev-C1-and-C2/m-p/972173#M144765 <HTML><HEAD></HEAD><BODY><P>Hello,</P><P></P><P>Could you tell which are the differences between MEK board in revision C1 and revision C2 ?</P><P></P><P>Reason for this request : we (our organisation and one partner) are experiencing slightly behaviour differences between our respective boards, with the same uBoot. And the almost last remaining differences are MEK boards: both have B0 silicium, but their PCB differs (rev C1 vs. C2).</P><P></P><P>See attached file for detailed configuration of our respective boards.</P><P></P><P>Best regards,</P><P>Laurent</P></BODY></HTML> Tue, 10 Sep 2019 12:45:19 GMT LaurentBardet 2019-09-10T12:45:19Z https://community.nxp.com/t5/i-MX-Processors/i-MX8QXP-MEK-Board-differences-between-PCB-rev-C1-and-C2/m-p/972173#M144765 <HTML><HEAD></HEAD><BODY><P>Hello,</P><P></P><P>Could you tell which are the differences between MEK board in revision C1 and revision C2 ?</P><P></P><P>Reason for this request : we (our organisation and one partner) are experiencing slightly behaviour differences between our respective boards, with the same uBoot. And the almost last remaining differences are MEK boards: both have B0 silicium, but their PCB differs (rev C1 vs. C2).</P><P></P><P>See attached file for detailed configuration of our respective boards.</P><P></P><P>Best regards,</P><P>Laurent</P></BODY></HTML> Tue, 10 Sep 2019 12:45:19 GMT https://community.nxp.com/t5/i-MX-Processors/i-MX8QXP-MEK-Board-differences-between-PCB-rev-C1-and-C2/m-p/972173#M144765 LaurentBardet 2019-09-10T12:45:19Z https://community.nxp.com/t5/i-MX-Processors/i-MX8QXP-MEK-Board-differences-between-PCB-rev-C1-and-C2/m-p/972174#M144766 <HTML><HEAD></HEAD><BODY><P>Hello,</P><P>&nbsp;</P><P>Please take a look to the schematic page 2, there you'll find the revision notes for the board, you can download the document from here:</P><P><A href="https://www.nxp.com/downloads/en/software/i.MX8QXPDF.zip">https://www.nxp.com/downloads/en/software/i.MX8QXPDF.zip</A></P><P>Also, please remember that the i.MX8X family is still in the pre-production stage so our support is limited, for further support please contact your assigned NXP FAE.</P><P>&nbsp;</P><P>Thank you for your understanding,</P><P>Best regards,</P><P>Aldo</P></BODY></HTML> Tue, 10 Sep 2019 15:13:29 GMT https://community.nxp.com/t5/i-MX-Processors/i-MX8QXP-MEK-Board-differences-between-PCB-rev-C1-and-C2/m-p/972174#M144766 AldoG 2019-09-10T15:13:29Z