i.MX Processorsのトピックi.MX wit NAND Flash

i.MX wit NAND Flash

jupiter_hce — Thu, 06 Jun 2019 10:13:18 GMT

Hi,

Has anyone use NAND for iMX6? Appreciate advice to work with NAND.

Thank you.

- JH

Drive your NAND within Linux Forget the word "nightmare" - YouTube

Re: i.MX wit NAND Flash

igorpadykov — Thu, 06 Jun 2019 23:33:17 GMT

Hi jupiter

yes nand can be used with i.MX6, one can look on NXP Linux documentation
i.MX Software | NXP

Best regards
igor
-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

Re: i.MX wit NAND Flash

jupiter_hce — Wed, 19 Jun 2019 10:34:54 GMT

Thanks igor, I am using i.MX 6ULZ processor (MCIMX6Z0DVM09AB) with internal NAND flash for a customized board, will it be sufficient to config UBOOT_CONFIG = "nand" in local.conf for downloading Linux kernel image to NAND and boot from NAND? I am also using the imx mfgtool uuu, do I need to configure UBOOT_CONFIG["mfgtool]?

Thank you very much.

Kind regards,

- jupiter

Re: i.MX wit NAND Flash

igorpadykov — Wed, 19 Jun 2019 15:36:18 GMT

Hi jupiter

one can look on

How-To use NAND boot on i.MX6UL EVK board

ULZ Migration Guide

https://www.nxp.com/docs/en/nxp/application-notes/AN12264.pdf

Best regards
igor