i.MX ProcessorsのトピックU-Boot Unzip Rootfs

U-Boot Unzip Rootfs

mitun_chidampar — Fri, 20 Sep 2019 12:04:28 GMT

U-Boot - unzip

Hello,
I am using a SOM based on the NXP i.MX6S7

I want to use the U-boot to update the firmware of our system. When I plugin a USB stick during startup, the u-boot should detect the USB and rewrite the rootfs.

In my u-boot these are the commands , I am using :

TX6S U-Boot > fatload usb 0:1 18000000 rootfs_tx6-emmc.tgz

reading rootfs_tx6-emmc.tgz
14063707 bytes read in 443 ms (30.3 MiB/s)

TX6S U-Boot > unzip 18000000 19000000
Uncompressed size: 39219200 = 0x2567000

After I unzip, how do i rewrite the rootfs in my mmc flash ?

Please guide me to the right direction.

Thank you

Regards,

Mitun Chidamparam

Re: U-Boot Unzip Rootfs

igorpadykov — Mon, 23 Sep 2019 00:50:56 GMT

Hi Mitun

one can look at solutions provided on

https://community.nxp.com/docs/DOC-343518

https://boundarydevices.com/programming-emmc-on-i-mx6/

Best regards
igor
-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

Re: U-Boot Unzip Rootfs

mitun_chidampar — Mon, 23 Sep 2019 12:40:59 GMT

How can I determine the correct start block size, when I use this command?

U-Boot > gzwrite mmc 1 10008000 0x$filesize 100000 0