topic Re: IMX8QXP linux-imx build failed in i.MX Processors

IMX8QXP linux-imx build failed

jing_xu1 — Mon, 05 Aug 2019 11:21:24 GMT

Hi,

I want to bulid Linux kernel in standslone environment for i.mx8qxp mek board, follow these steps in i.MX_Porting_Guide.pdf

Toolchain : environment-setup-aarch64-poky-linux
Linux_Config: defconfig
ARCH=arm64
CROSS_COMPILE=aarch64-poky-linux

$ cd linux-imx
$ make distclean
$ make defconfig

$ make -j 8

this error appeared:

In file included from arch/arm64/boot/dts/al/alpine-v2-evp.dts:35:0:
arch/arm64/boot/dts/al/alpine-v2.dtsi:37:10: fatal error: dt-bindings/interrupt-controller/arm-gic.h: No such file or directory
#include <dt-bindings/interrupt-controller/arm-gic.h>
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.
scripts/Makefile.lib:317: recipe for target 'arch/arm64/boot/dts/al/alpine-v2-evp.dtb' failed
make[2]: *** [arch/arm64/boot/dts/al/alpine-v2-evp.dtb] Error 1
scripts/Makefile.build:587: recipe for target 'arch/arm64/boot/dts/al' failed
make[1]: *** [arch/arm64/boot/dts/al] Error 2
arch/arm64/Makefile:138: recipe for target 'dtbs' failed
make: *** [dtbs] Error 2
make: *** Waiting for unfinished jobs....

How can i solve it ?

Re: IMX8QXP linux-imx build failed

CarlosCasillas — Mon, 05 Aug 2019 19:28:28 GMT

Hi Xu,

I’m afraid that i.MX8X family is still on preproduction and no additional information/support could be provided yet. For further assistance, please contact with your Sales/FAE.

Hope this will be useful for you.
Best regards!
/Carlos
-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "Mark Correct" button. Thank you!
-------------------------------------------------------------------------------

Re: IMX8QXP linux-imx build failed

jing_xu1 — Tue, 06 Aug 2019 09:42:35 GMT

Hi CarlosCasillas,

Thanks for your reply, i fixed it by myself.^_^

Re: IMX8QXP linux-imx build failed

shenjinhua — Wed, 07 Aug 2019 09:07:18 GMT

I have the same problem working on imx8mq, how do you solve it?

Re: IMX8QXP linux-imx build failed

jing_xu1 — Thu, 08 Aug 2019 01:00:05 GMT

Hi Jinhua

1.vim scripts/Makefile.lib,

add 3 lines into dtc_cpp_flags

dtc_cpp_flags = -Wp,-MD,$(depfile).pre.tmp -nostdinc \

-I$(srctree)/include \

-I$(srctree)/arch/$(SRCARCH)/boot/dts \

-I$(srctree)/arch/$(SRCARCH)/boot/dts/include \

-I$(srctree)/drivers/of/unittest-data \

$(addprefix -I,$(DTC_INCLUDE)) \

-undef -D__DTS__

2.ln -s ~/path/to/linux-imx/include ~/path/to/linux-imx/arch/arm64/boot/dts/include (ps:the path is must be absolute path)

...