topic Re: MFG Tool query in i.MX Processors

MFG Tool query

pankajjoshi — Mon, 21 Oct 2019 15:31:41 GMT

Hi All,

I have been using mfgtool "L4.9.11_1.0.0-ga_mfg-tools" pretty safely till now. I was creating 3 partitions in my image by modifying "mksdcard.sh.tar" for a 2 GB emmc card. Now i have changed to 4GB emmc card and somehow i am not able to fix the offsets used in ucl2.xml to erase the emmc. I have also increased the partition size. Due to which it seems some of the partitions are not getting cleared and i see crash on my wifi driver probing emmc.

Attach is the ucl2.xml and mksdcard.sh for reference. Please help!

Re: MFG Tool query

igorpadykov — Thu, 24 Oct 2019 04:31:51 GMT

Hi Pankaj

mfg tool is not more supported, recommended to migrate to uuu tool:

GitHub - NXPmicro/mfgtools: Freescale/NXP I.MX Chip image deploy tools.

Best regards
igor
-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------