topic Re: how to include the newly integrated machine driver codec in Kconfig file in i.MX Processors https://community.nxp.com/t5/i-MX-Processors/how-to-include-the-newly-integrated-machine-driver-codec-in/m-p/942983#M141036 <HTML><HEAD></HEAD><BODY><P>Hello,</P><P></P><P>Which i.MX device are you using?</P><P></P><P>Best regards,</P><P>Diego.</P></BODY></HTML> Mon, 21 Oct 2019 19:33:27 GMT diegoadrian 2019-10-21T19:33:27Z how to include the newly integrated machine driver codec in Kconfig file https://community.nxp.com/t5/i-MX-Processors/how-to-include-the-newly-integrated-machine-driver-codec-in/m-p/942982#M141035 <HTML><HEAD></HEAD><BODY><P>i wanted to add the integrated codec machine driver in Kconfig file but it is throwing the error when i compile .</P><P>###################################################################################</P><P>CONTENT added to the Kconfig file:</P><P>-------------------------------------------------</P><P>config SND_SOC_IMX_WM8960<BR /> tristate "SoC Audio support for i.MX boards with wm8960"<BR /> depends on OF &amp;&amp; I2C &amp;&amp; INPUT<BR /> select SND_SOC_WM8960<BR /> select SND_SOC_IMX_PCM_DMA<BR /> select SND_SOC_FSL_SAI<BR /> select SND_SOC_FSL_UTILS<BR /> select SND_KCTL_JACK<BR /> help<BR /> Say Y if you want to add support for SoC audio on an i.MX board with<BR /> a wm8960 codec.</P><P>#################################################################################</P><P>ERROR:</P><P>-----------</P><P></P><P>Console input/output is redirected. Run 'make oldconfig' to update configuration.<BR />|<BR />| make[4]: *** [silentoldconfig] Error 1<BR />| make[3]: *** [silentoldconfig] Error 2<BR />| make[2]: *** No rule to make target `include/config/auto.conf', needed by `include/config/kernel.release'. Stop.<BR />| make[2]: *** Waiting for unfinished jobs....<BR />| make[1]: *** [sub-make] Error 2<BR />| make: *** [__sub-make] Error 2<BR />| ERROR: oe_runmake failed<BR />| WARNING: exit code 1 from a shell command.</P><P></P><P>Please can i know what is the problem</P></BODY></HTML> Sat, 19 Oct 2019 13:59:10 GMT https://community.nxp.com/t5/i-MX-Processors/how-to-include-the-newly-integrated-machine-driver-codec-in/m-p/942982#M141035 dhanushvenugopa 2019-10-19T13:59:10Z Re: how to include the newly integrated machine driver codec in Kconfig file https://community.nxp.com/t5/i-MX-Processors/how-to-include-the-newly-integrated-machine-driver-codec-in/m-p/942983#M141036 <HTML><HEAD></HEAD><BODY><P>Hello,</P><P></P><P>Which i.MX device are you using?</P><P></P><P>Best regards,</P><P>Diego.</P></BODY></HTML> Mon, 21 Oct 2019 19:33:27 GMT https://community.nxp.com/t5/i-MX-Processors/how-to-include-the-newly-integrated-machine-driver-codec-in/m-p/942983#M141036 diegoadrian 2019-10-21T19:33:27Z