Micro-Processor for DAC And ADC

ashokb — Tue, 17 Sep 2019 11:12:12 GMT

Hi All,

We are Designing ultrasound device for that we are using dual channel, high voltage Transmitter(TX517) and DAC(ADS4128).

can anyone suggest me a IMX 6 or any other micro- processor part number suitable both interface.

Below attached the our application block diagram.

Thanks,

Ashok

Re: Micro-Processor for DAC And ADC

CarlosCasillas — Tue, 17 Sep 2019 20:52:15 GMT

Hi Ashok,

In case of the ultrasound transmitter, if it uses GPIOs as interface, practically any i.MX processor could be used to drive it (or actually any other microcontroller).

However, in case of the high-speed ADC, its datasheet mentions that has LVDS output, and I’m afraid that we don’t have any processor/controller with LVDS input; the parts with LVDS module could be only used as output, so, you may consider a different ADC with other compatible high-speed interface.

Hope this will be useful for you.
Best regards!
/Carlos
-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "Mark Correct" button. Thank you!

-------------------------------------------------------------------------------

i.MX ProcessorsのトピックMicro-Processor for DAC And ADC

Micro-Processor for DAC And ADC

Re: Micro-Processor for DAC And ADC