How to Port Android on MCIMX6Q-SDB using mfgtool

chum — Tue, 01 Oct 2019 11:24:32 GMT

I have all images on $:~/android_build/out/target/product directory.

• /u-boot-imx6q.imx
• /partition-table.img
• /boot-imx6q.img (boot.img)
• /system.img
• /recovery-imx6q.img
• /vendor.img

How to port all .img and .imx file on to SD card using MFGtool.

mcimx6qsdb mfg-tool

android9‌ #android8.0

Re: How to Port Android on MCIMX6Q-SDB using mfgtool

AldoG — Fri, 04 Oct 2019 18:27:44 GMT

Hello,

Please take a look to section 3.3 Flashing board images of the Android_Quick_Start_Guide.pdf attached here

Hope this helps,

Best regards,

Aldo.

-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "Mark Correct" button. Thank you!

- We are following threads for 7 weeks after the last post, later replies are ignored
Please open a new thread and refer to the closed one, if you have a related question at a later point in time.
-------------------------------------------------------------------------------

topic How to Port Android on MCIMX6Q-SDB using mfgtool in i.MX Processors

How to Port Android on MCIMX6Q-SDB using mfgtool

Re: How to Port Android on MCIMX6Q-SDB using mfgtool