topic Re: iMX pin tool v6 proxy settings in i.MX Processors

iMX pin tool v6 proxy settings

mthueson — Fri, 27 Sep 2019 15:00:17 GMT

I'm trying to open a .mex file that wants to reach out and download some configuration data but it always errors saying:
"Communication error. Check the connectivity to the Internet and repeat again."

The internet works so I assume it's having trouble getting through my company's proxy. I found the preference setting for proxies and have tried both direct and native but both produce the same error. Is there a manual way to configure proxy settings when the automated native setting doesn't work, or what else could I try to fix the issue? According to IT they don't even see a proxy hit when the tool makes the attempt and errors.

I know the .mex file is good because I've been able to open it on another computer connected to an open network.

Re: iMX pin tool v6 proxy settings

igorpadykov — Fri, 04 Oct 2019 07:01:41 GMT

Hi Mark

one can look at below link with some explanation of proxy usage

NXP Pins Tool: Understanding Data for Offline Usage | MCU on Eclipse

Best regards
igor
-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

Re: iMX pin tool v6 proxy settings

mthueson — Fri, 04 Oct 2019 13:32:38 GMT

Thanks! That gave us enough to get it all running.