i.MX8X power-up/down sequence guidelines

Kazuma_Sasaki — Wed, 29 May 2019 04:51:26 GMT

Power-up/down sequence guidelines described in datasheet.

Please let me confirm three points here.

From latest datasheet. (IMX8DXAEC Rev. 1, 5/2019)

Q1. Regarding power-up sequence. datasheet defined "a stable voltage operating within the operating range".

It means that we only care timing which over the minimum defined operating range. Is it right? I draw a timing chart based on my understanding as below. is it okay?

Q2. Regarding power-down sequence. datasheet mentioned "Supply group 0 must be turned off last, after all other supplies".

What timing the group 0 is allow to turn off? I draw a timing chart based on my understanding as below. Is it okay?

if my understanding wrong, please elaborate more detail about turn off timing.

Q3. Regarding power-up sequence. datasheet mentioned group 0 must be powered first but, other groups are allowable to power simultaneously group 0. I draw a timing chart based on my understanding as below. Is it okay?

Best Regards,

Kazuma Sasaki.

Re: i.MX8X power-up/down sequence guidelines

Yuri — Wed, 29 May 2019 05:33:18 GMT

Hello,

Your understanding is correct and the waveforms are acceptable.

Have a great day,

Yuri

-------------------------------------------------------------------------------

Note:

- If this post answers your question, please click the "Mark Correct" button. Thank you!

- We are following threads for 7 weeks after the last post, later replies are ignored

Please open a new thread and refer to the closed one, if you have a related question at a later point in time.

topic i.MX8X power-up/down sequence guidelines in i.MX Processors

i.MX8X power-up/down sequence guidelines

Re: i.MX8X power-up/down sequence guidelines