topic DS90UB914A-Q1/913 camera capture image problem in i.MX Processors

DS90UB914A-Q1/913 camera capture image problem

857849964 — Wed, 12 Jun 2019 07:22:09 GMT

i am using DS90UB914A-Q1/913 camera to capture image

i can receive 913 camera data and save those，but the image is green. like below:

the 913 camera format is ccir601 8bit （UYVY），1280*720.

the CSI0 Sensor Configuration Register value: CSI_SENS_CONF = 0x00009A00 （External VSYNC mode ，UYVY ， 10BIT_DATA_WIDTH，Sensor Protocol：Gated clock mode）

any idea about dealing with this problem？

thank a lot！

Re: DS90UB914A-Q1/913 camera capture image problem

igorpadykov — Fri, 14 Jun 2019 22:07:55 GMT

Hi lin

one can try to reuse adv7180 driver an check below

https://community.nxp.com/docs/DOC-332679

ADV7181 on IMX6Q board

Best regards
igor
-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

Re: DS90UB914A-Q1/913 camera capture image problem

857849964 — Thu, 20 Jun 2019 01:57:50 GMT

The issue was done！The data pin must to connect data 12 -19，if using yuv 8bit format camera！