WM8904 audio codec dts configuration for imx6ull

francesco_cenci — Wed, 25 Sep 2019 14:38:42 GMT

Hello All,

I'm working with a MYS-6ULX-IOT board from MyirTech. The board is equipped with a i.mx6ull processor.

I'm trying to use the WM8904 audio codec available with the productor expansion board "MYB-6ULX Expansion Board"

root@hst:/home/hst# aplay -l
aplay: device_list:268: no soundcards found...

I'm using a custom Debian filesystem ( Debian 8) with the official MyirTech's U-Boot and kernel (linux 4.1.15).

I've recompiled kernel with

cd /home/xubuntu/MYS6ULx-devel/kernel-4.1.15
export DEV_ROOT=~/MYS6ULx-devel
export PATH=$DEV_ROOT/gcc-linaro-4.9-2014.11-x86_64_arm-linux-gnueabihf/bin:$PATH
export CROSS_COMPILE=arm-linux-gnueabihf-
export ARCH=arm

make distclean
make mys_imx6_defconfig
make menuconfig

Throug menuconfig, i've loaded the .config file created with "make mys_imx6_defconfig" and theese flags are checked:

"Device Drivers > Sound card support > Advanced Linux Sound Architecture > ALSA for SoC audio support > SoC Audio for Freescale CPUs > Symbol: SND_SOC_IMX_WM8904 [=y] "

Device Drivers > I2C support > I2C device interface

Device Drivers > I2C support > I2C bus multiplexing support

I also edited the file "imx6ull-14x14-evk.dts" by adding the following lines:

&i2c2 {
clock_frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>;
status = "okay";
   codec: wm8904@1a {
   compatible = "wlf,wm8904";
   reg = <0x1a>;
   clocks = <&clks IMX6UL_CLK_SAI2>;
clock-names = "mclk";
};
};

make zImage dtbs modules

I can use i2sedetect -y 1 to find the audio device at address <0x1a>:

0 1 2 3 4 5 6 7 8 9 a b c d e f
00: -- -- -- -- -- -- -- -- -- -- -- -- --
10: -- -- -- -- -- -- -- -- -- -- UU -- -- -- -- --
20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
70: -- -- -- -- -- -- -- --

root@hst:/home/hst# dmesg | grep i2c
[ 0.280365] i2c i2c-1: IMX I2C adapter registered
[ 0.280406] i2c i2c-1: can't use DMA
[ 1.365824] msg ft5x0x_i2c_rxdata i2c read error: -5

[ 1.402050] i2c /dev entries driver

root@hst:/home/hst# dmesg | grep wm8904
[ 1.796089] wm8904 1-001a: revision A

What am I missing?

The complete .dts file and the boot sequence is in the attachment

Thank you very much in advice,

Francesco

Re: WM8904 audio codec dts configuration for imx6ull

igorpadykov — Thu, 26 Sep 2019 00:06:09 GMT

Hi Francesco

one can check sect.7.1.4.1 ASoC Driver Source Architecture

attached Linux Manual and try to debug it starting with codec driver described in

Table 7-1. Stereo Codec SoC Driver Files, create something like imx-wm8904.c

driver and debug it starting from probe function. Check i2c communication with oscilloscope.

Best regards
igor
-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

topic WM8904 audio codec dts configuration for imx6ull in i.MX Processors

WM8904 audio codec dts configuration for imx6ull

Re: WM8904 audio codec dts configuration for imx6ull