i.mx 6solox

feitang — Tue, 23 Apr 2019 06:18:06 GMT

I have two flash, "NOR Flash (MT25QL128ABA8E12-0)"&"NAND Flash (MT29F1G08ABAEAH4)".

I want use JTAG interface to flashing data into NOR&NAND through i.mx 6solox ,use "PE cycloneuniversal" programmer.

I want to know ,if this programmer can satisfy the demands ,and how do i need to do.

Re: i.mx 6solox

igorpadykov — Wed, 24 Apr 2019 00:07:49 GMT

Hi fei

for programming images to external media may be used mfg tool or uuu described on link

i.MX Software | NXP

GitHub - NXPmicro/mfgtools: Freescale/NXP I.MX Chip image deploy tools.

unfortunately programming using "PE cycloneuniversal" is not supported.

Best regards
igor
-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

i.MX Processors中的主题 Re: i.mx 6solox

i.mx 6solox

Re: i.mx 6solox