i.MX ProcessorsのトピックRe: Give Access to only subscribe to avoid the data usage

Give Access to only subscribe to avoid the data usage

vinothkumars — Tue, 21 May 2019 06:39:44 GMT

Dear NXP,

I am working on Android 7 on imx6 processor. I want to write the script with AT commands to "SIM7500_SIM7600 " . for limit the data usage or used to give the access for some specific subscribe.

Thanks & Regads,

VinothS

Re: Give Access to only subscribe to avoid the data usage

igorpadykov — Tue, 21 May 2019 10:36:10 GMT

Hi VinothS

for AT+ commands one can look at

Send AT Commands to Android Phone - Stack Overflow

or boundary devices cell modems archives

https://boundarydevices.com/cellular-modems-on-i-mx6-boards/

Best regards
igor
-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

Re: Give Access to only subscribe to avoid the data usage

vinothkumars — Tue, 21 May 2019 11:02:04 GMT

Thank you igor,

Re: Give Access to only subscribe to avoid the data usage

vinothkumars — Tue, 28 May 2019 12:46:48 GMT

I want to update firmware for my requirement. With old firmware my requirements is not fulfilled. I closed this thread now.

Re: Give Access to only subscribe to avoid the data usage

vinothkumars — Wed, 29 May 2019 12:37:49 GMT

This configuration is done in firmware side, I closed this thread now.