Power key press sends up+down events simultaneously

gsteimle — Fri, 12 Apr 2019 19:21:22 GMT

Hello.

We have Android 7.1.2 (Nougat) running on a device with imx6. When we press the Power key on the device, we see the following getevent output that shows shows both DOWN and UP events being sent. When the Power key is released, no event is seen:

[     726.515409] /dev/input/event2: EV_KEY       KEY_POWER            DOWN
[     726.515409] /dev/input/event2: EV_SYN       SYN_REPORT           00000000
[     726.530056] /dev/input/event2: EV_KEY       KEY_POWER            UP
[     726.530056] /dev/input/event2: EV_SYN       SYN_REPORT           00000000

With the same hardware running Android JellyBean, we see the expected behavior, where the DOWN event is seen on the key press, and the UP event is seen on the key release. Can you help us to produce the expected behavior on Nougat?

Here is the related device tree entry:

    gpio_keys: gpio-keys {
       compatible = "gpio-keys";
       pinctrl-names = "default";
       pinctrl-0 = <&pinctrl_gpio_keys>;

       volume-back {
           label = "Volume Back";
           interrupts-extended = <&gpio7 12 IRQ_TYPE_EDGE_FALLING>;
           wakeup-source;
           linux,code = <KEY_BACK>;
           debounce-interval = <5>;
       };

       power {
           label = "Power Button";
           interrupts-extended = <&gpio1 5 IRQ_TYPE_EDGE_FALLING>;
           wakeup-source;
           linux,code = <KEY_POWER>;
           debounce-interval = <5>;
       };
   };

Further details might be seen from the "getevent -li" output:

add device 1: /dev/input/event0
bus:      0019
vendor    0001
product   0001
version   0100
name:     "gpio-keys-polled"
location: "gpio-keys-polled/input0"
id:       ""
version: 1.0.1
events:
    KEY (0001): KEY_WAKEUP
input props:
    <none>
could not get driver version for /dev/input/mouse0, Not a typewriter
add device 2: /dev/input/event1
bus:      0018
vendor    0000
product   0000
version   0000
name:     "EP0980M09"
location: ""
id:       ""
version: 1.0.1
events:
    KEY (0001): BTN_TOUCH
    ABS (0003): ABS_X                 : value 298, min 0, max 479, fuzz 0, flat 0, resolution 0
                ABS_Y                 : value 185, min 0, max 271, fuzz 0, flat 0, resolution 0
                ABS_MT_SLOT           : value 0, min 0, max 4, fuzz 0, flat 0, resolution 0
                ABS_MT_POSITION_X     : value 0, min 0, max 479, fuzz 0, flat 0, resolution 0
                ABS_MT_POSITION_Y     : value 0, min 0, max 271, fuzz 0, flat 0, resolution 0
                ABS_MT_TRACKING_ID    : value 0, min 0, max 65535, fuzz 0, flat 0, resolution 0
input props:
    INPUT_PROP_DIRECT
add device 3: /dev/input/event2
bus:      0019
vendor    0001
product   0001
version   0100
name:     "gpio-keys"
location: "gpio-keys/input0"
id:       ""
version: 1.0.1
events:
    KEY (0001): KEY_POWER             KEY_BACK
input props:
    <none>
could not get driver version for /dev/input/mice, Not a typewriter

Re: Power key press sends up+down events simultaneously

diegoadrian — Wed, 17 Jul 2019 14:06:08 GMT

Hello,

Are you still having a problem with this?

Otherwise, can you please pass me the revision of your board?

Best regards,

Diego.

Re: Power key press sends up+down events simultaneously

gsteimle — Thu, 18 Jul 2019 01:35:13 GMT

Hi,

We were able to resolve this by replacing this line in the power button section of the device tree (.dtsi) file

interrupts-extended = <&gpio1 5 IRQ_TYPE_EDGE_FALLING>;

with this

gpios = <&gpio1 5 IRQ_TYPE_EDGE_RISING>;

Thanks,

Gary

i.MX ProcessorsのトピックPower key press sends up+down events simultaneously

Power key press sends up+down events simultaneously

Re: Power key press sends up+down events simultaneously

Re: Power key press sends up+down events simultaneously