topic Re: Android Nought incoming/outgoing call error in i.MX Processors

Android Nought incoming/outgoing call error

vinothkumars — Tue, 14 May 2019 13:09:43 GMT

Dear NXP,

I am working on Toradex apalis imx6q with Android Nougat. we got the issue, once we disconnect outgoing call, incoming call UI is coming abruptly.

Steps::
1. connect the phone(android or iphone) to our custom board.
2. Make the outgoing call.
3. After accepting the call , disconnect the call.

Observation::

Android::
incoming call UI is coming abruptly and it is remain same for long time.

Iphone::
incoming call UI is coming abruptly and suddenly it is refershing.

What could be the issue. and which side these issue came either BSP or Application.

Regards,

VinothS

Re: Android Nought incoming/outgoing call error

diegoadrian — Fri, 17 May 2019 23:51:46 GMT

Hello,

Unfortunately, the GSM module is not currently supported in our BSP, I recommend you to go with Toradex, probably they could help you.

Best regards,

Diego.

Re: Android Nought incoming/outgoing call error

vinothkumars — Mon, 20 May 2019 05:13:30 GMT

Hi Diego,

Thank you for your reply. This is the problem from the Android application side, and this one fixed by Android Application developer.

So, we close this thread now.

Thanks & Regards,

VinothS