i.MX ProcessorsのトピックRe: how to application u-boot command

how to application u-boot command

kangmw086 — Fri, 26 Apr 2019 02:52:35 GMT

i used i.mx6 sabreauto board.

Is it possible to add / remove / modify u-boot command in application after I.MX6 board booting is completed?

I want to create a linux application that will function like 'setenv ~~', 'saveenv' in the u-boot menu when booting the board.

Do you have references or examples?

And is there a way to control it like gui instead of command in u-boot like windows cmos?

It does not have to be 'gui'. You need something to select the u-boot command.

regards!!

Re: how to application u-boot command

igorpadykov — Fri, 26 Apr 2019 03:28:45 GMT

Hi k

as this is specific uboot question one can post it to uboot mail list

U-Boot Info Page

Best regards
igor
-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------