i.MX Processorsのトピックefuse for iMX https://community.nxp.com/t5/i-MX-Processors/efuse-for-iMX/m-p/152171#M1348 <HTML><HEAD></HEAD><BODY><P>Hi,</P><P>&nbsp;</P><P>Would you pls tell me how to burn the efuse of the iMX chips (like iMX53) please?</P><P>&nbsp;</P><P>Thx</P><P>&nbsp;</P><P>Van</P></BODY></HTML> Thu, 14 Apr 2011 20:55:24 GMT VanT 2011-04-14T20:55:24Z efuse for iMX https://community.nxp.com/t5/i-MX-Processors/efuse-for-iMX/m-p/152171#M1348 <HTML><HEAD></HEAD><BODY><P>Hi,</P><P>&nbsp;</P><P>Would you pls tell me how to burn the efuse of the iMX chips (like iMX53) please?</P><P>&nbsp;</P><P>Thx</P><P>&nbsp;</P><P>Van</P></BODY></HTML> Thu, 14 Apr 2011 20:55:24 GMT https://community.nxp.com/t5/i-MX-Processors/efuse-for-iMX/m-p/152171#M1348 VanT 2011-04-14T20:55:24Z Re: efuse for iMX https://community.nxp.com/t5/i-MX-Processors/efuse-for-iMX/m-p/152172#M1349 <HTML><HEAD></HEAD><BODY><SPAN>There's multiple ways to do it, depending on what you have running on your board. If you don't have anything running and just have JTAG connection, then you can write a small program using whatever IDE and JTAG connection you're using to develop/debug and burn the fuses that way. If you have Linux running on it, see this discussion (and attached file in one of the postings) on the Freescale Forums:</SPAN><A href="http://forums.freescale.com/t5/i-MX-Microprocessors/i-MX25-HAB-secure-boot-question/td-p/57853" target="_blank">http://forums.freescale.com/t5/i-MX-Microprocessors/i-MX25-HAB-secure-boot-question/td-p/57853</A></BODY></HTML> Fri, 15 Apr 2011 21:48:17 GMT https://community.nxp.com/t5/i-MX-Processors/efuse-for-iMX/m-p/152172#M1349 MarianoGoluboff 2011-04-15T21:48:17Z